BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
NEMIX RAM
64 GB kit of four 16 GB DDR4 ECC UDIMMs running at 2400 MHz with CL17 latency and 1.2 V operation
This 64GB kit contains four 16GB DDR4 2400MHz modules built with ECC error correction and an unbuffered design. It targets administrators upgrading compatible servers or workstations that require registered-free memory at PC4-19200 speed. The modules operate at a standard 1.2V and carry a CAS latency of 17 for stable operation.
Each stick uses a 2Rx8 organisation assembled from major OEM Samsung, Micron or Hynix components on a 288-pin UDIMM PCB. The unbuffered layout means the modules plug directly into standard DDR4 slots without a register chip, simplifying installation in platforms that support ECC unbuffered memory. Gold-edge contacts resist oxidation during long service cycles.
Before ordering, verify that your motherboard or system accepts DDR4 2400MHz ECC UDIMM modules and can populate four slots with a 2Rx8 configuration. Confirm the platform does not require registered or load-reduced DIMMs, which are electrically incompatible. Ensure the BIOS can initialise the full 64GB capacity at the rated speed and latency.
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: ME19200-628K4-SM-SYS-5019S-L |
| Part Number | Part#: ME19200-628K4-SM-SYS-5019S-L |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | 17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Each module is rated for 2400 MT/s and PC4-19200, the industry designation for that speed grade; real-world throughput depends on the platform's memory controller.
The kit uses standard 288-pin DDR4 UDIMM form factor, so it fits any server or workstation board that accepts unbuffered ECC DDR4 DIMMs.
Populate the slots in the order shown in the motherboard manual — usually one per channel first — and press each DIMM down until both side clips click; the common mistake is stopping before the clips latch fully.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?