NZXT CM-H92FW-01 H9 Flow PC case White
- White
- SGCC / Tempered Gla…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
NZXT
Mid-tower case with tinted tempered glass panels, four pre-installed fans, support for E-ATX boards and GPUs up to 459 mm
Model H9 Flow RGB (2025)
The NZXT CM-H92FB-R1 is a black mid-tower chassis built from tinted tempered glass on two sides. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards, giving builders a wide platform choice. Seven expansion slots provide room for full-length add-in cards. The internal layout is designed for high-airflow cooling configurations.
Four fans ship installed: one 120 mm unit at the rear and three 140 mm units on the side. The case supports up to three 120 mm or three 140 mm fans at the top, three 120 mm or three 140 mm fans at the bottom, and the single rear 120 mm position. This flexibility lets users tailor intake and exhaust paths without buying extra hardware.
Maximum graphics-card length is 459 mm when front-right fans are thinner than 56 mm, dropping to 410 mm with a 56 mm thick 420 mm radiator and fans fitted. CPU cooler height is capped at 165 mm and power-supply length at 200 mm. Builders planning oversized components must verify fit against these constraints before purchase.
| Brand | NZXT |
|---|---|
| Model | CM-H92FB-R1 |
| Color | Black |
| Case Material | tinted tempered glass |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 3 x 140mm |
| Max GPU Length | "Up to 459 mm (with <56 mm thickness fans installed at the front-right) Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)" |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | 200 mm |
| Dimensions | 19.9" x 12.4" x 18.9" |
| Sūtījuma svars | 15.47 kg |
| Sūtījuma izmēri | 587 × 568 × 400 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The case has no dust filters listed in its specifications, so no filter maintenance is required.
GPU length is limited to 410 mm in that configuration, which is the first constraint you will hit.
No noise ratings or fan-speed curves are provided for the pre-installed 140 mm side and 120 mm rear fans.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?