NZXT CM-H92FW-01 H9 Flow PC case White
- White
- SGCC / Tempered Gla…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NZXT
Mid-tower case with tinted tempered glass panels, four pre-installed fans, support for E-ATX boards and GPUs up to 459 mm
Model H9 Flow RGB (2025)
The NZXT CM-H92FB-R1 is a black mid-tower chassis built from tinted tempered glass on two sides. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards, giving builders a wide platform choice. Seven expansion slots provide room for full-length add-in cards. The internal layout is designed for high-airflow cooling configurations.
Four fans ship installed: one 120 mm unit at the rear and three 140 mm units on the side. The case supports up to three 120 mm or three 140 mm fans at the top, three 120 mm or three 140 mm fans at the bottom, and the single rear 120 mm position. This flexibility lets users tailor intake and exhaust paths without buying extra hardware.
Maximum graphics-card length is 459 mm when front-right fans are thinner than 56 mm, dropping to 410 mm with a 56 mm thick 420 mm radiator and fans fitted. CPU cooler height is capped at 165 mm and power-supply length at 200 mm. Builders planning oversized components must verify fit against these constraints before purchase.
| Brand | NZXT |
|---|---|
| Model | CM-H92FB-R1 |
| Color | Black |
| Case Material | tinted tempered glass |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 3 x 140mm |
| Max GPU Length | "Up to 459 mm (with <56 mm thickness fans installed at the front-right) Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)" |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | 200 mm |
| Dimensions | 19.9" x 12.4" x 18.9" |
| Lähetyspaino | 15.47 kg |
| Pakkauksen mitat | 587 × 568 × 400 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The case has no dust filters listed in its specifications, so no filter maintenance is required.
GPU length is limited to 410 mm in that configuration, which is the first constraint you will hit.
No noise ratings or fan-speed curves are provided for the pre-installed 140 mm side and 120 mm rear fans.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?