NZXT CM-H92FW-01 H9 Flow PC case White
- White
- SGCC / Tempered Gla…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NZXT
White mid-tower case with dual tempered-glass panels holds ATX or E-ATX boards, fits GPUs to 459 mm, CPU coolers to 165 mm and PSUs to 200 mm, and includes four 140 mm and one 120 mm fan
Model H9 Flow RGB (2025)
The NZXT CM-H92FW-R1 is a white mid-tower chassis built from SGCC steel with tempered glass panels on two sides. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards, making it suitable for a wide range of desktop assemblies. Fourteen drive bays and seven expansion slots give ample room for storage and add-in cards.
Pre-installed fans include one 120 mm rear unit and three 140 mm side units. Mounting points support up to three 120 mm or three 140 mm fans at the top and bottom, plus a single 120 mm rear fan. Graphics card clearance reaches 459 mm with slim front-right fans under 56 mm thick, but drops to 410 mm when a 420 mm radiator and 56 mm fans occupy that space. CPU cooler height is capped at 165 mm and power supply length at 200 mm.
The 459 mm maximum applies only when front-right fans are thinner than 56 mm; thicker fans or a 420 mm liquid cooling radiator reduce the limit to 410 mm. Builders planning long graphics cards must verify their cooler thickness against these two figures before purchase.
| Brand | NZXT |
|---|---|
| Model | CM-H92FW-R1 |
| Color | White |
| Case Material | SGCC / Tempered Glass |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 3 x 140mm |
| Max GPU Length | "Up to 459 mm (with <56 mm thickness fans installed at the front-right) Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)" |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | 200 mm |
| Dimensions | 19.9" x 12.4" x 18.9" |
| Lähetyspaino | 16.24 kg |
| Pakkauksen mitat | 584 × 572 × 394 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The case supports ATX, E-ATX, Micro ATX and Mini ITX boards, so you can match any current desktop platform without checking separate compatibility lists.
A card up to 459 mm fits when front fans are thinner than 56 mm; if you run a 420 mm AIO with 56 mm fans the limit drops to 410 mm, so measure your cooler stack first.
The front I/O connects to standard internal USB 3.0, USB 2.0 and HD audio headers on the motherboard, giving full headset and peripheral support without adapters.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?