NZXT CM-H92FW-01 H9 Flow PC case White
- White
- SGCC / Tempered Gla…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
NZXT
White mid-tower case with dual tempered-glass panels holds ATX or E-ATX boards, fits GPUs to 459 mm, CPU coolers to 165 mm and PSUs to 200 mm, and includes four 140 mm and one 120 mm fan
Model H9 Flow RGB (2025)
The NZXT CM-H92FW-R1 is a white mid-tower chassis built from SGCC steel with tempered glass panels on two sides. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards, making it suitable for a wide range of desktop assemblies. Fourteen drive bays and seven expansion slots give ample room for storage and add-in cards.
Pre-installed fans include one 120 mm rear unit and three 140 mm side units. Mounting points support up to three 120 mm or three 140 mm fans at the top and bottom, plus a single 120 mm rear fan. Graphics card clearance reaches 459 mm with slim front-right fans under 56 mm thick, but drops to 410 mm when a 420 mm radiator and 56 mm fans occupy that space. CPU cooler height is capped at 165 mm and power supply length at 200 mm.
The 459 mm maximum applies only when front-right fans are thinner than 56 mm; thicker fans or a 420 mm liquid cooling radiator reduce the limit to 410 mm. Builders planning long graphics cards must verify their cooler thickness against these two figures before purchase.
| Brand | NZXT |
|---|---|
| Model | CM-H92FW-R1 |
| Color | White |
| Case Material | SGCC / Tempered Glass |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 3 x 140mm |
| Max GPU Length | "Up to 459 mm (with <56 mm thickness fans installed at the front-right) Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)" |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | 200 mm |
| Dimensions | 19.9" x 12.4" x 18.9" |
| Prepravná hmotnosť | 16.24 kg |
| Rozmery balenia | 584 × 572 × 394 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The case supports ATX, E-ATX, Micro ATX and Mini ITX boards, so you can match any current desktop platform without checking separate compatibility lists.
A card up to 459 mm fits when front fans are thinner than 56 mm; if you run a 420 mm AIO with 56 mm fans the limit drops to 410 mm, so measure your cooler stack first.
The front I/O connects to standard internal USB 3.0, USB 2.0 and HD audio headers on the motherboard, giving full headset and peripheral support without adapters.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?