NZXT CM-H92FW-01 H9 Flow PC case White
- White
- SGCC / Tempered Gla…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
NZXT
Mid-tower case with tinted tempered glass panels, four pre-installed fans, support for E-ATX boards and GPUs up to 459 mm
Model H9 Flow RGB (2025)
The NZXT CM-H92FB-R1 is a black mid-tower chassis built from tinted tempered glass on two sides. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards, giving builders a wide platform choice. Seven expansion slots provide room for full-length add-in cards. The internal layout is designed for high-airflow cooling configurations.
Four fans ship installed: one 120 mm unit at the rear and three 140 mm units on the side. The case supports up to three 120 mm or three 140 mm fans at the top, three 120 mm or three 140 mm fans at the bottom, and the single rear 120 mm position. This flexibility lets users tailor intake and exhaust paths without buying extra hardware.
Maximum graphics-card length is 459 mm when front-right fans are thinner than 56 mm, dropping to 410 mm with a 56 mm thick 420 mm radiator and fans fitted. CPU cooler height is capped at 165 mm and power-supply length at 200 mm. Builders planning oversized components must verify fit against these constraints before purchase.
| Brand | NZXT |
|---|---|
| Model | CM-H92FB-R1 |
| Color | Black |
| Case Material | tinted tempered glass |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 3 x 140mm |
| Max GPU Length | "Up to 459 mm (with <56 mm thickness fans installed at the front-right) Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)" |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | 200 mm |
| Dimensions | 19.9" x 12.4" x 18.9" |
| Prepravná hmotnosť | 15.47 kg |
| Rozmery balenia | 587 × 568 × 400 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The case has no dust filters listed in its specifications, so no filter maintenance is required.
GPU length is limited to 410 mm in that configuration, which is the first constraint you will hit.
No noise ratings or fan-speed curves are provided for the pre-installed 140 mm side and 120 mm rear fans.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?