NZXT CM-H92FW-01 H9 Flow PC case White
- White
- SGCC / Tempered Gla…
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
NZXT
Mid-tower case with tinted tempered glass panels, four pre-installed fans, support for E-ATX boards and GPUs up to 459 mm
Model H9 Flow RGB (2025)
The NZXT CM-H92FB-R1 is a black mid-tower chassis built from tinted tempered glass on two sides. It accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards, giving builders a wide platform choice. Seven expansion slots provide room for full-length add-in cards. The internal layout is designed for high-airflow cooling configurations.
Four fans ship installed: one 120 mm unit at the rear and three 140 mm units on the side. The case supports up to three 120 mm or three 140 mm fans at the top, three 120 mm or three 140 mm fans at the bottom, and the single rear 120 mm position. This flexibility lets users tailor intake and exhaust paths without buying extra hardware.
Maximum graphics-card length is 459 mm when front-right fans are thinner than 56 mm, dropping to 410 mm with a 56 mm thick 420 mm radiator and fans fitted. CPU cooler height is capped at 165 mm and power-supply length at 200 mm. Builders planning oversized components must verify fit against these constraints before purchase.
| Brand | NZXT |
|---|---|
| Model | CM-H92FB-R1 |
| Color | Black |
| Case Material | tinted tempered glass |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Bottom - 3 x 120mm / Bottom - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 3 x 140mm |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 3 x 140mm |
| Max GPU Length | "Up to 459 mm (with <56 mm thickness fans installed at the front-right) Up to 410 mm (with 56 mm thick 420 mm AIO and fans installed at the front-right)" |
| Max CPU Cooler Height | 165 mm |
| Max PSU Length | 200 mm |
| Dimensions | 19.9" x 12.4" x 18.9" |
| Verzendgewicht | 15.47 kg |
| Pakketafmetingen | 587 × 568 × 400 mm |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The case has no dust filters listed in its specifications, so no filter maintenance is required.
GPU length is limited to 410 mm in that configuration, which is the first constraint you will hit.
No noise ratings or fan-speed curves are provided for the pre-installed 140 mm side and 120 mm rear fans.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?