OWC 4GB DDR4 2400 CL17 1.2V 288-pin desktop RAM
- 4GB
- DDR4 2400 (PC4 1920…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
A dual-channel kit of two 4 GB DDR4 2400 CL17 unbuffered UDIMMs running at 1.2 V for desktop upgrades
Capacity 8GB (2 x 4GB)
This OWC kit provides 8GB of desktop memory as two matched 4GB modules. It runs at DDR4 2400 with a CAS latency of 17 and operates at the standard 1.2V. The unbuffered, non-ECC UDIMMs use the 288-pin form factor and are fully compliant with JEDEC specifications.
The dual-channel configuration benefits mainstream desktop boards with two free slots. Systems requiring error-correcting code or registered modules cannot use this kit. Builders needing higher capacities per module or faster data rates should consider other options.
The DDR4 2400 (PC4-19200) speed grade is the primary specification that determines compatibility with the motherboard and memory controller. Verify that the platform supports this transfer rate before purchase.
| Brand | OWC |
|---|---|
| Part Number | 2U4D41R8008P |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Yes, each 4 GB stick uses the standard 288-pin DDR4 UDIMM form factor that matches any desktop board with DDR4 DIMM sockets.
The modules run at 1.2 V and 2400 MT/s by default; most boards detect them automatically, but enabling XMP or manually setting 2400 MHz ensures rated speed.
Power off, remove the sticks, gently rub the edge contacts with a soft pencil eraser, blow away residue, then reseat firmly until the retention clips click.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?