OWC 4GB DDR4 2400 CL17 1.2V 288-pin desktop RAM
- 4GB
- DDR4 2400 (PC4 1920…
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
OWC
A dual-channel kit of two 4 GB DDR4 2400 CL17 unbuffered UDIMMs running at 1.2 V for desktop upgrades
Capacity 8GB (2 x 4GB)
This OWC kit provides 8GB of desktop memory as two matched 4GB modules. It runs at DDR4 2400 with a CAS latency of 17 and operates at the standard 1.2V. The unbuffered, non-ECC UDIMMs use the 288-pin form factor and are fully compliant with JEDEC specifications.
The dual-channel configuration benefits mainstream desktop boards with two free slots. Systems requiring error-correcting code or registered modules cannot use this kit. Builders needing higher capacities per module or faster data rates should consider other options.
The DDR4 2400 (PC4-19200) speed grade is the primary specification that determines compatibility with the motherboard and memory controller. Verify that the platform supports this transfer rate before purchase.
| Brand | OWC |
|---|---|
| Part Number | 2U4D41R8008P |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Yes, each 4 GB stick uses the standard 288-pin DDR4 UDIMM form factor that matches any desktop board with DDR4 DIMM sockets.
The modules run at 1.2 V and 2400 MT/s by default; most boards detect them automatically, but enabling XMP or manually setting 2400 MHz ensures rated speed.
Power off, remove the sticks, gently rub the edge contacts with a soft pencil eraser, blow away residue, then reseat firmly until the retention clips click.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?