OWC 4GB DDR4 2400 CL17 1.2V 288-pin desktop RAM
- 4GB
- DDR4 2400 (PC4 1920…
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
OWC
A dual-channel kit of two 4 GB DDR4 2400 CL17 unbuffered UDIMMs running at 1.2 V for desktop upgrades
Capacity 8GB (2 x 4GB)
This OWC kit provides 8GB of desktop memory as two matched 4GB modules. It runs at DDR4 2400 with a CAS latency of 17 and operates at the standard 1.2V. The unbuffered, non-ECC UDIMMs use the 288-pin form factor and are fully compliant with JEDEC specifications.
The dual-channel configuration benefits mainstream desktop boards with two free slots. Systems requiring error-correcting code or registered modules cannot use this kit. Builders needing higher capacities per module or faster data rates should consider other options.
The DDR4 2400 (PC4-19200) speed grade is the primary specification that determines compatibility with the motherboard and memory controller. Verify that the platform supports this transfer rate before purchase.
| Brand | OWC |
|---|---|
| Part Number | 2U4D41R8008P |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Yes, each 4 GB stick uses the standard 288-pin DDR4 UDIMM form factor that matches any desktop board with DDR4 DIMM sockets.
The modules run at 1.2 V and 2400 MT/s by default; most boards detect them automatically, but enabling XMP or manually setting 2400 MHz ensures rated speed.
Power off, remove the sticks, gently rub the edge contacts with a soft pencil eraser, blow away residue, then reseat firmly until the retention clips click.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?