OWC 4GB DDR4 2400 CL17 1.2V 288-pin desktop RAM
- 4GB
- DDR4 2400 (PC4 1920…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A dual-channel kit of two 4 GB DDR4 2400 CL17 unbuffered UDIMMs running at 1.2 V for desktop upgrades
Capacity 8GB (2 x 4GB)
This OWC kit provides 8GB of desktop memory as two matched 4GB modules. It runs at DDR4 2400 with a CAS latency of 17 and operates at the standard 1.2V. The unbuffered, non-ECC UDIMMs use the 288-pin form factor and are fully compliant with JEDEC specifications.
The dual-channel configuration benefits mainstream desktop boards with two free slots. Systems requiring error-correcting code or registered modules cannot use this kit. Builders needing higher capacities per module or faster data rates should consider other options.
The DDR4 2400 (PC4-19200) speed grade is the primary specification that determines compatibility with the motherboard and memory controller. Verify that the platform supports this transfer rate before purchase.
| Brand | OWC |
|---|---|
| Part Number | 2U4D41R8008P |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, each 4 GB stick uses the standard 288-pin DDR4 UDIMM form factor that matches any desktop board with DDR4 DIMM sockets.
The modules run at 1.2 V and 2400 MT/s by default; most boards detect them automatically, but enabling XMP or manually setting 2400 MHz ensures rated speed.
Power off, remove the sticks, gently rub the edge contacts with a soft pencil eraser, blow away residue, then reseat firmly until the retention clips click.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?