OWC 4GB DDR4 2133MHz CL15 1.2V UDIMM desktop RAM
- 4GB
- DDR4 2133 (PC4 1700…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A single 4GB DDR4 2400 CL17 1.2V 288-pin unbuffered DIMM for desktop PCs, workstations and NAS systems, backward compatible with 2133MHz
This OWC module adds 4GB of DDR4 2400 memory to a desktop PC, workstation or compatible NAS. It runs at PC4-19200 speed with CL17 latency and 1.2V operation. The unbuffered, non-ECC UDIMM is designed for straightforward capacity upgrades.
Installation is a tool-free process: align the notch on the 288-pin UDIMM with the motherboard slot and press until the retention clips click. The module is backward compatible with 2133MHz systems, so it will downclock automatically if the platform requires it. Handle the board by its edges to avoid static discharge, and ensure the slot is free of dust before seating the stick.
Before ordering, confirm that the target system accepts DDR4 unbuffered non-ECC UDIMMs and has a free 288-pin slot. Check the motherboard or platform documentation for maximum supported capacity per slot and total memory limit. The module carries no heat spreader, so ensure adequate airflow around the memory area.
| Brand | OWC |
|---|---|
| Part Number | 2U4D41R804GB |
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the module is backward compatible with 2133MHz systems and will run at the lower speed automatically.
No, the module does not have a heat spreader, keeping the profile low for compact desktop builds.
Yes, installation is a straightforward DIY task — align the notch with the 288-pin slot and press until the clips engage.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?