NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Replace Power
ATX 420W unit with one 80mm fan, switchable 110V or 220V input, and SATA, 20-pin or 24-pin ATX, plus 12V connectors
This 420 W ATX unit from Replace Power is built as a direct swap for Gateway 102015, 102544, 500GR, 503GR, 504GR, 506GR, 508GE and 550GR desktops. It also fits HP, Dell, Compaq and other common systems that use standard ATX mounting. The grey chassis weighs 0.1 kg and includes a single cooling fan.
A switchable 110 V / 220 V input lets the supply work on either mains voltage. Cooling is handled by an 80 mm fan. Cabling provides one 15-inch SATA connector, one 14-inch ATX connector that supports both 20-pin and 24-pin motherboard headers, and one 14-inch 12 V ATX connector. The standard ATX form factor means it drops into existing screw holes without modification.
The unit replaces a faulty or under-powered factory PSU in the listed Gateway models and compatible OEM desktops. The jump is worth it when the original supply has failed, when a newer graphics card or additional drives demand more than the old unit could deliver, or when a noisy fan signals end of life.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-73 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The RPSU-C99-73 has a manual 110V/220V selector switch on the rear. Set it to match your local mains voltage before plugging the unit in.
It ships with a 14-inch ATX cable that fits both 20-pin and 24-pin motherboard headers.
Seat the 20/24-pin ATX connector firmly into the motherboard before attaching the 12V and SATA leads; skipping this step leaves the board unpowered.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?