NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Replace Power
ATX 420W unit with one 80mm fan, switchable 110V or 220V input, and SATA, 20-pin or 24-pin ATX, plus 12V connectors
This 420 W ATX unit from Replace Power is built as a direct swap for Gateway 102015, 102544, 500GR, 503GR, 504GR, 506GR, 508GE and 550GR desktops. It also fits HP, Dell, Compaq and other common systems that use standard ATX mounting. The grey chassis weighs 0.1 kg and includes a single cooling fan.
A switchable 110 V / 220 V input lets the supply work on either mains voltage. Cooling is handled by an 80 mm fan. Cabling provides one 15-inch SATA connector, one 14-inch ATX connector that supports both 20-pin and 24-pin motherboard headers, and one 14-inch 12 V ATX connector. The standard ATX form factor means it drops into existing screw holes without modification.
The unit replaces a faulty or under-powered factory PSU in the listed Gateway models and compatible OEM desktops. The jump is worth it when the original supply has failed, when a newer graphics card or additional drives demand more than the old unit could deliver, or when a noisy fan signals end of life.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-73 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The RPSU-C99-73 has a manual 110V/220V selector switch on the rear. Set it to match your local mains voltage before plugging the unit in.
It ships with a 14-inch ATX cable that fits both 20-pin and 24-pin motherboard headers.
Seat the 20/24-pin ATX connector firmly into the motherboard before attaching the 12V and SATA leads; skipping this step leaves the board unpowered.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?