NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Replace Power
ATX 420W unit with one 80mm fan, switchable 110V or 220V input, and SATA, 20-pin or 24-pin ATX, plus 12V connectors
This 420 W ATX unit from Replace Power is built as a direct swap for Gateway 102015, 102544, 500GR, 503GR, 504GR, 506GR, 508GE and 550GR desktops. It also fits HP, Dell, Compaq and other common systems that use standard ATX mounting. The grey chassis weighs 0.1 kg and includes a single cooling fan.
A switchable 110 V / 220 V input lets the supply work on either mains voltage. Cooling is handled by an 80 mm fan. Cabling provides one 15-inch SATA connector, one 14-inch ATX connector that supports both 20-pin and 24-pin motherboard headers, and one 14-inch 12 V ATX connector. The standard ATX form factor means it drops into existing screw holes without modification.
The unit replaces a faulty or under-powered factory PSU in the listed Gateway models and compatible OEM desktops. The jump is worth it when the original supply has failed, when a newer graphics card or additional drives demand more than the old unit could deliver, or when a noisy fan signals end of life.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-73 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The RPSU-C99-73 has a manual 110V/220V selector switch on the rear. Set it to match your local mains voltage before plugging the unit in.
It ships with a 14-inch ATX cable that fits both 20-pin and 24-pin motherboard headers.
Seat the 20/24-pin ATX connector firmly into the motherboard before attaching the 12V and SATA leads; skipping this step leaves the board unpowered.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?