NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Replace Power
ATX 420W unit with one 80mm fan, switchable 110V or 220V input, and SATA, 20-pin or 24-pin ATX, plus 12V connectors
This 420 W ATX unit from Replace Power is built as a direct swap for Gateway 102015, 102544, 500GR, 503GR, 504GR, 506GR, 508GE and 550GR desktops. It also fits HP, Dell, Compaq and other common systems that use standard ATX mounting. The grey chassis weighs 0.1 kg and includes a single cooling fan.
A switchable 110 V / 220 V input lets the supply work on either mains voltage. Cooling is handled by an 80 mm fan. Cabling provides one 15-inch SATA connector, one 14-inch ATX connector that supports both 20-pin and 24-pin motherboard headers, and one 14-inch 12 V ATX connector. The standard ATX form factor means it drops into existing screw holes without modification.
The unit replaces a faulty or under-powered factory PSU in the listed Gateway models and compatible OEM desktops. The jump is worth it when the original supply has failed, when a newer graphics card or additional drives demand more than the old unit could deliver, or when a noisy fan signals end of life.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-73 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The RPSU-C99-73 has a manual 110V/220V selector switch on the rear. Set it to match your local mains voltage before plugging the unit in.
It ships with a 14-inch ATX cable that fits both 20-pin and 24-pin motherboard headers.
Seat the 20/24-pin ATX connector firmly into the motherboard before attaching the 12V and SATA leads; skipping this step leaves the board unpowered.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?