NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
SK hynix
64GB DDR4-2400 ECC LRDIMM with CL17 latency at 1.20V for server memory expansion
This 64 GB DDR4 load-reduced DIMM delivers high-density memory for multi-socket servers and virtualization hosts. ECC protection corrects single-bit errors to maintain data integrity across large memory footprints. The module operates at the standard 1.20 V, keeping power draw predictable in dense configurations. It is not suited for desktop boards that cannot address LRDIMM topology.
Rated at DDR4-2400 (PC4-19200) with CL17 timings, the module runs at the JEDEC-standard 1.20 V during typical workloads. The load-reduced buffer reduces electrical load on the memory bus, allowing more modules per channel without increasing voltage. Thermal output remains proportional to capacity and bus activity rather than clock headroom. No enthusiast overclocking profiles are defined for this part.
Under continuous memory-bound workloads the LRDIMM maintains its rated 2400 MT/s transfer rate without downclocking, because the buffer isolates DRAM timing from channel signalling. ECC scrubbing runs in parallel with normal traffic, so error correction does not introduce latency spikes during extended operations. The 1.20 V rail stays stable as long as the platform supplies within specification. Systems requiring higher frequencies or lower latencies must select different modules.
| Brand | Hynix |
|---|---|
| Part Number | HMAA8GL7MMR4N-UH |
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
Align the notch with the DDR4 slot key, press firmly until both retention clips click, and ensure the server BIOS is set to 1.20 V for correct operation.
No routine maintenance is required; the module is replaced only if a memory test reports correctable or uncorrectable ECC errors.
The 17-cycle CAS latency and 1.20 V operating point set the bandwidth ceiling before thermal throttling becomes a factor.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?