EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
SK hynix
64GB DDR4-2400 ECC LRDIMM with CL17 latency at 1.20V for server memory expansion
This 64 GB DDR4 load-reduced DIMM delivers high-density memory for multi-socket servers and virtualization hosts. ECC protection corrects single-bit errors to maintain data integrity across large memory footprints. The module operates at the standard 1.20 V, keeping power draw predictable in dense configurations. It is not suited for desktop boards that cannot address LRDIMM topology.
Rated at DDR4-2400 (PC4-19200) with CL17 timings, the module runs at the JEDEC-standard 1.20 V during typical workloads. The load-reduced buffer reduces electrical load on the memory bus, allowing more modules per channel without increasing voltage. Thermal output remains proportional to capacity and bus activity rather than clock headroom. No enthusiast overclocking profiles are defined for this part.
Under continuous memory-bound workloads the LRDIMM maintains its rated 2400 MT/s transfer rate without downclocking, because the buffer isolates DRAM timing from channel signalling. ECC scrubbing runs in parallel with normal traffic, so error correction does not introduce latency spikes during extended operations. The 1.20 V rail stays stable as long as the platform supplies within specification. Systems requiring higher frequencies or lower latencies must select different modules.
| Brand | Hynix |
|---|---|
| Part Number | HMAA8GL7MMR4N-UH |
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
Align the notch with the DDR4 slot key, press firmly until both retention clips click, and ensure the server BIOS is set to 1.20 V for correct operation.
No routine maintenance is required; the module is replaced only if a memory test reports correctable or uncorrectable ECC errors.
The 17-cycle CAS latency and 1.20 V operating point set the bandwidth ceiling before thermal throttling becomes a factor.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?