NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
SK hynix
64GB DDR4-2400 ECC LRDIMM with CL17 latency at 1.20V for server memory expansion
This 64 GB DDR4 load-reduced DIMM delivers high-density memory for multi-socket servers and virtualization hosts. ECC protection corrects single-bit errors to maintain data integrity across large memory footprints. The module operates at the standard 1.20 V, keeping power draw predictable in dense configurations. It is not suited for desktop boards that cannot address LRDIMM topology.
Rated at DDR4-2400 (PC4-19200) with CL17 timings, the module runs at the JEDEC-standard 1.20 V during typical workloads. The load-reduced buffer reduces electrical load on the memory bus, allowing more modules per channel without increasing voltage. Thermal output remains proportional to capacity and bus activity rather than clock headroom. No enthusiast overclocking profiles are defined for this part.
Under continuous memory-bound workloads the LRDIMM maintains its rated 2400 MT/s transfer rate without downclocking, because the buffer isolates DRAM timing from channel signalling. ECC scrubbing runs in parallel with normal traffic, so error correction does not introduce latency spikes during extended operations. The 1.20 V rail stays stable as long as the platform supplies within specification. Systems requiring higher frequencies or lower latencies must select different modules.
| Brand | Hynix |
|---|---|
| Part Number | HMAA8GL7MMR4N-UH |
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
Align the notch with the DDR4 slot key, press firmly until both retention clips click, and ensure the server BIOS is set to 1.20 V for correct operation.
No routine maintenance is required; the module is replaced only if a memory test reports correctable or uncorrectable ECC errors.
The 17-cycle CAS latency and 1.20 V operating point set the bandwidth ceiling before thermal throttling becomes a factor.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?