NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
SK hynix
64GB DDR4-2400 ECC LRDIMM with CL17 latency at 1.20V for server memory expansion
This 64 GB DDR4 load-reduced DIMM delivers high-density memory for multi-socket servers and virtualization hosts. ECC protection corrects single-bit errors to maintain data integrity across large memory footprints. The module operates at the standard 1.20 V, keeping power draw predictable in dense configurations. It is not suited for desktop boards that cannot address LRDIMM topology.
Rated at DDR4-2400 (PC4-19200) with CL17 timings, the module runs at the JEDEC-standard 1.20 V during typical workloads. The load-reduced buffer reduces electrical load on the memory bus, allowing more modules per channel without increasing voltage. Thermal output remains proportional to capacity and bus activity rather than clock headroom. No enthusiast overclocking profiles are defined for this part.
Under continuous memory-bound workloads the LRDIMM maintains its rated 2400 MT/s transfer rate without downclocking, because the buffer isolates DRAM timing from channel signalling. ECC scrubbing runs in parallel with normal traffic, so error correction does not introduce latency spikes during extended operations. The 1.20 V rail stays stable as long as the platform supplies within specification. Systems requiring higher frequencies or lower latencies must select different modules.
| Brand | Hynix |
|---|---|
| Part Number | HMAA8GL7MMR4N-UH |
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
Align the notch with the DDR4 slot key, press firmly until both retention clips click, and ensure the server BIOS is set to 1.20 V for correct operation.
No routine maintenance is required; the module is replaced only if a memory test reports correctable or uncorrectable ECC errors.
The 17-cycle CAS latency and 1.20 V operating point set the bandwidth ceiling before thermal throttling becomes a factor.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?