NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
SK hynix
64GB DDR4-2400 ECC LRDIMM with CL17 latency at 1.20V for server memory expansion
This 64 GB DDR4 load-reduced DIMM delivers high-density memory for multi-socket servers and virtualization hosts. ECC protection corrects single-bit errors to maintain data integrity across large memory footprints. The module operates at the standard 1.20 V, keeping power draw predictable in dense configurations. It is not suited for desktop boards that cannot address LRDIMM topology.
Rated at DDR4-2400 (PC4-19200) with CL17 timings, the module runs at the JEDEC-standard 1.20 V during typical workloads. The load-reduced buffer reduces electrical load on the memory bus, allowing more modules per channel without increasing voltage. Thermal output remains proportional to capacity and bus activity rather than clock headroom. No enthusiast overclocking profiles are defined for this part.
Under continuous memory-bound workloads the LRDIMM maintains its rated 2400 MT/s transfer rate without downclocking, because the buffer isolates DRAM timing from channel signalling. ECC scrubbing runs in parallel with normal traffic, so error correction does not introduce latency spikes during extended operations. The 1.20 V rail stays stable as long as the platform supplies within specification. Systems requiring higher frequencies or lower latencies must select different modules.
| Brand | Hynix |
|---|---|
| Part Number | HMAA8GL7MMR4N-UH |
| Capacity | 64GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
Align the notch with the DDR4 slot key, press firmly until both retention clips click, and ensure the server BIOS is set to 1.20 V for correct operation.
No routine maintenance is required; the module is replaced only if a memory test reports correctable or uncorrectable ECC errors.
The 17-cycle CAS latency and 1.20 V operating point set the bandwidth ceiling before thermal throttling becomes a factor.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?