Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with M.2 and mSATA slots, USB 3.0 connector

SMUGDESK

SMUGDESK 2-in-1 M.2 SATA & mSATA to USB 3.0 Adapter (2230/2242/2260/2280)

SKU CH-E2JW-C83PW

Converts SATA M.2 and mSATA SSDs to USB 3.0 external storage, supporting 2230, 2242, 2260 and 2280 sizes with plug-and-play operation across Windows, Mac and Linux

  • Turns idle SATA SSDs into portable external storage via USB 3.0
  • Supports M.2 NGFF B-Key and B+M-Key drives in 2230, 2242, 2260, 2280 sizes
  • Works with mSATA SSDs for wider drive compatibility
  • Plug-and-play operation on Windows, Mac OS, and Linux without drivers
  • SATA 6 Gbps interface enables fast large-file transfers and disk cloning

What this adapter does

The SMUGDESK 2-in-1 adapter converts a SATA M.2 NGFF or mSATA solid-state drive into external USB 3.0 storage. It supports B Key and B+M Key M.2 modules in 2230, 2242, 2260 and 2280 lengths as well as standard mSATA SSDs. The board works with Windows, Mac OS and Linux without driver installation.

Check your drive before ordering

This converter only recognises SATA protocol M.2 NGFF B Key and B+M Key SSDs. It cannot detect PCIe NVMe M.2 drives, so verify that your module uses the SATA interface. Confirm the physical keying and form factor match the supported 2230, 2242, 2260 or 2280 sizes before purchase.

Build and daily use

The optimised PCB layout provides low power consumption, stable signal transmission and improved heat resistance to prevent unexpected disconnection during extended sessions. A compact, lightweight structure makes the adapter easy to carry for data migration, drive reuse, file archiving and routine computer maintenance.

Priekšrocības

  • Turns idle SATA SSDs into portable external storage via USB 3.0
  • Supports M.2 NGFF B-Key and B+M-Key drives in 2230, 2242, 2260, 2280 sizes
  • Works with mSATA SSDs for wider drive compatibility
  • Plug-and-play operation on Windows, Mac OS, and Linux without drivers
  • SATA 6 Gbps interface enables fast large-file transfers and disk cloning

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Does the adapter include cables or a power supply, or must they be purchased separately?

The board only provides the M.2 and mSATA slots plus a USB 3.0 connector; no cables or external power supply are included, so a standard USB 3.0 cable must be supplied by the user.

Which M.2 key types and lengths does this board accept?

It accepts SATA M.2 NGFF drives with B Key or B+M Key in 2230, 2242, 2260 and 2280 lengths; NVMe PCIe M.2 drives are not supported.

What real-world throughput can I expect from the USB 3.0 link when cloning a large SATA SSD?

The USB 3.0 interface caps the connection at 5 Gbps, so sustained clone speeds will be limited by that link rather than the drive's native SATA 6 Gbps capability.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.