Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with M.2 and mSATA slots, USB 3.0 connector

SMUGDESK

SMUGDESK 2-in-1 M.2 SATA & mSATA to USB 3.0 Adapter (2230/2242/2260/2280)

SKU CH-E2JW-C83PW

Converts SATA M.2 and mSATA SSDs to USB 3.0 external storage, supporting 2230, 2242, 2260 and 2280 sizes with plug-and-play operation across Windows, Mac and Linux

  • Turns idle SATA SSDs into portable external storage via USB 3.0
  • Supports M.2 NGFF B-Key and B+M-Key drives in 2230, 2242, 2260, 2280 sizes
  • Works with mSATA SSDs for wider drive compatibility
  • Plug-and-play operation on Windows, Mac OS, and Linux without drivers
  • SATA 6 Gbps interface enables fast large-file transfers and disk cloning

What this adapter does

The SMUGDESK 2-in-1 adapter converts a SATA M.2 NGFF or mSATA solid-state drive into external USB 3.0 storage. It supports B Key and B+M Key M.2 modules in 2230, 2242, 2260 and 2280 lengths as well as standard mSATA SSDs. The board works with Windows, Mac OS and Linux without driver installation.

Check your drive before ordering

This converter only recognises SATA protocol M.2 NGFF B Key and B+M Key SSDs. It cannot detect PCIe NVMe M.2 drives, so verify that your module uses the SATA interface. Confirm the physical keying and form factor match the supported 2230, 2242, 2260 or 2280 sizes before purchase.

Build and daily use

The optimised PCB layout provides low power consumption, stable signal transmission and improved heat resistance to prevent unexpected disconnection during extended sessions. A compact, lightweight structure makes the adapter easy to carry for data migration, drive reuse, file archiving and routine computer maintenance.

I korthet

  • Turns idle SATA SSDs into portable external storage via USB 3.0
  • Supports M.2 NGFF B-Key and B+M-Key drives in 2230, 2242, 2260, 2280 sizes
  • Works with mSATA SSDs for wider drive compatibility
  • Plug-and-play operation on Windows, Mac OS, and Linux without drivers
  • SATA 6 Gbps interface enables fast large-file transfers and disk cloning

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Does the adapter include cables or a power supply, or must they be purchased separately?

The board only provides the M.2 and mSATA slots plus a USB 3.0 connector; no cables or external power supply are included, so a standard USB 3.0 cable must be supplied by the user.

Which M.2 key types and lengths does this board accept?

It accepts SATA M.2 NGFF drives with B Key or B+M Key in 2230, 2242, 2260 and 2280 lengths; NVMe PCIe M.2 drives are not supported.

What real-world throughput can I expect from the USB 3.0 link when cloning a large SATA SSD?

The USB 3.0 interface caps the connection at 5 Gbps, so sustained clone speeds will be limited by that link rather than the drive's native SATA 6 Gbps capability.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.