Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with M.2 and mSATA slots, USB 3.0 connector

SMUGDESK

SMUGDESK 2-in-1 M.2 SATA & mSATA to USB 3.0 Adapter (2230/2242/2260/2280)

SKU CH-E2JW-C83PW

Converts SATA M.2 and mSATA SSDs to USB 3.0 external storage, supporting 2230, 2242, 2260 and 2280 sizes with plug-and-play operation across Windows, Mac and Linux

  • Turns idle SATA SSDs into portable external storage via USB 3.0
  • Supports M.2 NGFF B-Key and B+M-Key drives in 2230, 2242, 2260, 2280 sizes
  • Works with mSATA SSDs for wider drive compatibility
  • Plug-and-play operation on Windows, Mac OS, and Linux without drivers
  • SATA 6 Gbps interface enables fast large-file transfers and disk cloning

What this adapter does

The SMUGDESK 2-in-1 adapter converts a SATA M.2 NGFF or mSATA solid-state drive into external USB 3.0 storage. It supports B Key and B+M Key M.2 modules in 2230, 2242, 2260 and 2280 lengths as well as standard mSATA SSDs. The board works with Windows, Mac OS and Linux without driver installation.

Check your drive before ordering

This converter only recognises SATA protocol M.2 NGFF B Key and B+M Key SSDs. It cannot detect PCIe NVMe M.2 drives, so verify that your module uses the SATA interface. Confirm the physical keying and form factor match the supported 2230, 2242, 2260 or 2280 sizes before purchase.

Build and daily use

The optimised PCB layout provides low power consumption, stable signal transmission and improved heat resistance to prevent unexpected disconnection during extended sessions. A compact, lightweight structure makes the adapter easy to carry for data migration, drive reuse, file archiving and routine computer maintenance.

Prednosti

  • Turns idle SATA SSDs into portable external storage via USB 3.0
  • Supports M.2 NGFF B-Key and B+M-Key drives in 2230, 2242, 2260, 2280 sizes
  • Works with mSATA SSDs for wider drive compatibility
  • Plug-and-play operation on Windows, Mac OS, and Linux without drivers
  • SATA 6 Gbps interface enables fast large-file transfers and disk cloning

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

Does the adapter include cables or a power supply, or must they be purchased separately?

The board only provides the M.2 and mSATA slots plus a USB 3.0 connector; no cables or external power supply are included, so a standard USB 3.0 cable must be supplied by the user.

Which M.2 key types and lengths does this board accept?

It accepts SATA M.2 NGFF drives with B Key or B+M Key in 2230, 2242, 2260 and 2280 lengths; NVMe PCIe M.2 drives are not supported.

What real-world throughput can I expect from the USB 3.0 link when cloning a large SATA SSD?

The USB 3.0 interface caps the connection at 5 Gbps, so sustained clone speeds will be limited by that link rather than the drive's native SATA 6 Gbps capability.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.