Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with M.2 slot and Mini SAS SFF-8087 connector

SMUGDESK

SMUGDESK M.2 NVMe to Mini SAS SFF-8087 4-Port SATA 3.0 6Gbps Adapter

SKU CH-H7K9-MQ6PP

Converts an M.2 NVMe slot into four SATA 3.0 ports at 6Gbps via Mini SAS SFF-8087 for multi-drive expansion

  • Converts M.2 NVMe to Mini SAS SFF-8087 for flexible drive connections
  • Expands storage with four independent SATA 3.0 6Gbps ports for multiple drives
  • Stable controller chip delivers reliable signal transmission during long operation
  • Compatible with regular 2.5 and 3.5 SATA HDDs and SSDs
  • Compact plug-and-play design installs easily without extra drivers

M.2 NVMe to Mini SAS Adapter

This adapter converts an M.2 NVMe slot into a Mini SAS SFF-8087 connection. It is designed for builders who need to connect multiple SATA drives through a single high-speed interface. The card suits desktops, workstations and small servers requiring extra storage lanes.

Four SATA 3.0 Ports at 6Gbps

The controller expands one NVMe link into four independent SATA 3.0 ports running at 6Gbps. This replaces direct motherboard SATA headers when those are exhausted or unavailable. The jump is worthwhile when adding several 2.5 or 3.5 drives without occupying extra PCIe slots.

Fits Standard Expansion Slots

The compact board installs into a compatible M.2 NVMe slot and requires no extra drivers. It frees up motherboard SATA ports for other devices while supporting regular SATA HDDs and SSDs. Builders needing NVMe passthrough or more than four drives should consider alternative solutions.

Priekšrocības

  • Converts M.2 NVMe to Mini SAS SFF-8087 for flexible drive connections
  • Expands storage with four independent SATA 3.0 6Gbps ports for multiple drives
  • Stable controller chip delivers reliable signal transmission during long operation
  • Compatible with regular 2.5 and 3.5 SATA HDDs and SSDs
  • Compact plug-and-play design installs easily without extra drivers

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

What slot and bracket clearance does the SMUGDESK adapter need inside the case?

It plugs into an M.2 NVMe slot and presents a Mini SAS SFF-8087 connector, so the board must fit the M.2 footprint and the bracket must clear a standard PCI bracket cut-out.

Which step do installers most often miss when fitting this card?

They forget to connect the four SATA 3.0 6Gbps drives to the breakout cable after seating the adapter in the M.2 slot, leaving the new ports unused.

What part will need replacement first if a drive bay is swapped repeatedly?

The Mini SAS SFF-8087 cable end sees the most insertions, so its connector wears before the on-board M.2 edge or the SATA 3.0 ports.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.