Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with M.2 slot and Mini SAS SFF-8087 connector

SMUGDESK

SMUGDESK M.2 NVMe to Mini SAS SFF-8087 4-Port SATA 3.0 6Gbps Adapter

SKU CH-H7K9-MQ6PP

Converts an M.2 NVMe slot into four SATA 3.0 ports at 6Gbps via Mini SAS SFF-8087 for multi-drive expansion

  • Converts M.2 NVMe to Mini SAS SFF-8087 for flexible drive connections
  • Expands storage with four independent SATA 3.0 6Gbps ports for multiple drives
  • Stable controller chip delivers reliable signal transmission during long operation
  • Compatible with regular 2.5 and 3.5 SATA HDDs and SSDs
  • Compact plug-and-play design installs easily without extra drivers

M.2 NVMe to Mini SAS Adapter

This adapter converts an M.2 NVMe slot into a Mini SAS SFF-8087 connection. It is designed for builders who need to connect multiple SATA drives through a single high-speed interface. The card suits desktops, workstations and small servers requiring extra storage lanes.

Four SATA 3.0 Ports at 6Gbps

The controller expands one NVMe link into four independent SATA 3.0 ports running at 6Gbps. This replaces direct motherboard SATA headers when those are exhausted or unavailable. The jump is worthwhile when adding several 2.5 or 3.5 drives without occupying extra PCIe slots.

Fits Standard Expansion Slots

The compact board installs into a compatible M.2 NVMe slot and requires no extra drivers. It frees up motherboard SATA ports for other devices while supporting regular SATA HDDs and SSDs. Builders needing NVMe passthrough or more than four drives should consider alternative solutions.

Puncte forte

  • Converts M.2 NVMe to Mini SAS SFF-8087 for flexible drive connections
  • Expands storage with four independent SATA 3.0 6Gbps ports for multiple drives
  • Stable controller chip delivers reliable signal transmission during long operation
  • Compatible with regular 2.5 and 3.5 SATA HDDs and SSDs
  • Compact plug-and-play design installs easily without extra drivers

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What slot and bracket clearance does the SMUGDESK adapter need inside the case?

It plugs into an M.2 NVMe slot and presents a Mini SAS SFF-8087 connector, so the board must fit the M.2 footprint and the bracket must clear a standard PCI bracket cut-out.

Which step do installers most often miss when fitting this card?

They forget to connect the four SATA 3.0 6Gbps drives to the breakout cable after seating the adapter in the M.2 slot, leaving the new ports unused.

What part will need replacement first if a drive bay is swapped repeatedly?

The Mini SAS SFF-8087 cable end sees the most insertions, so its connector wears before the on-board M.2 edge or the SATA 3.0 ports.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.