نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with M.2 slot and Mini SAS SFF-8087 connector

SMUGDESK

SMUGDESK M.2 NVMe to Mini SAS SFF-8087 4-Port SATA 3.0 6Gbps Adapter

SKU CH-H7K9-MQ6PP

Converts an M.2 NVMe slot into four SATA 3.0 ports at 6Gbps via Mini SAS SFF-8087 for multi-drive expansion

  • Converts M.2 NVMe to Mini SAS SFF-8087 for flexible drive connections
  • Expands storage with four independent SATA 3.0 6Gbps ports for multiple drives
  • Stable controller chip delivers reliable signal transmission during long operation
  • Compatible with regular 2.5 and 3.5 SATA HDDs and SSDs
  • Compact plug-and-play design installs easily without extra drivers

M.2 NVMe to Mini SAS Adapter

This adapter converts an M.2 NVMe slot into a Mini SAS SFF-8087 connection. It is designed for builders who need to connect multiple SATA drives through a single high-speed interface. The card suits desktops, workstations and small servers requiring extra storage lanes.

Four SATA 3.0 Ports at 6Gbps

The controller expands one NVMe link into four independent SATA 3.0 ports running at 6Gbps. This replaces direct motherboard SATA headers when those are exhausted or unavailable. The jump is worthwhile when adding several 2.5 or 3.5 drives without occupying extra PCIe slots.

Fits Standard Expansion Slots

The compact board installs into a compatible M.2 NVMe slot and requires no extra drivers. It frees up motherboard SATA ports for other devices while supporting regular SATA HDDs and SSDs. Builders needing NVMe passthrough or more than four drives should consider alternative solutions.

أبرز المميزات

  • Converts M.2 NVMe to Mini SAS SFF-8087 for flexible drive connections
  • Expands storage with four independent SATA 3.0 6Gbps ports for multiple drives
  • Stable controller chip delivers reliable signal transmission during long operation
  • Compatible with regular 2.5 and 3.5 SATA HDDs and SSDs
  • Compact plug-and-play design installs easily without extra drivers

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

What slot and bracket clearance does the SMUGDESK adapter need inside the case?

It plugs into an M.2 NVMe slot and presents a Mini SAS SFF-8087 connector, so the board must fit the M.2 footprint and the bracket must clear a standard PCI bracket cut-out.

Which step do installers most often miss when fitting this card?

They forget to connect the four SATA 3.0 6Gbps drives to the breakout cable after seating the adapter in the M.2 slot, leaving the new ports unused.

What part will need replacement first if a drive bay is swapped repeatedly?

The Mini SAS SFF-8087 cable end sees the most insertions, so its connector wears before the on-board M.2 edge or the SATA 3.0 ports.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.