Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board with M.2 slot and Mini SAS SFF-8087 connector

SMUGDESK

SMUGDESK M.2 NVMe to Mini SAS SFF-8087 4-Port SATA 3.0 6Gbps Adapter

SKU CH-H7K9-MQ6PP

Converts an M.2 NVMe slot into four SATA 3.0 ports at 6Gbps via Mini SAS SFF-8087 for multi-drive expansion

  • Converts M.2 NVMe to Mini SAS SFF-8087 for flexible drive connections
  • Expands storage with four independent SATA 3.0 6Gbps ports for multiple drives
  • Stable controller chip delivers reliable signal transmission during long operation
  • Compatible with regular 2.5 and 3.5 SATA HDDs and SSDs
  • Compact plug-and-play design installs easily without extra drivers

M.2 NVMe to Mini SAS Adapter

This adapter converts an M.2 NVMe slot into a Mini SAS SFF-8087 connection. It is designed for builders who need to connect multiple SATA drives through a single high-speed interface. The card suits desktops, workstations and small servers requiring extra storage lanes.

Four SATA 3.0 Ports at 6Gbps

The controller expands one NVMe link into four independent SATA 3.0 ports running at 6Gbps. This replaces direct motherboard SATA headers when those are exhausted or unavailable. The jump is worthwhile when adding several 2.5 or 3.5 drives without occupying extra PCIe slots.

Fits Standard Expansion Slots

The compact board installs into a compatible M.2 NVMe slot and requires no extra drivers. It frees up motherboard SATA ports for other devices while supporting regular SATA HDDs and SSDs. Builders needing NVMe passthrough or more than four drives should consider alternative solutions.

Pluspunten

  • Converts M.2 NVMe to Mini SAS SFF-8087 for flexible drive connections
  • Expands storage with four independent SATA 3.0 6Gbps ports for multiple drives
  • Stable controller chip delivers reliable signal transmission during long operation
  • Compatible with regular 2.5 and 3.5 SATA HDDs and SSDs
  • Compact plug-and-play design installs easily without extra drivers

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

What slot and bracket clearance does the SMUGDESK adapter need inside the case?

It plugs into an M.2 NVMe slot and presents a Mini SAS SFF-8087 connector, so the board must fit the M.2 footprint and the bracket must clear a standard PCI bracket cut-out.

Which step do installers most often miss when fitting this card?

They forget to connect the four SATA 3.0 6Gbps drives to the breakout cable after seating the adapter in the M.2 slot, leaving the new ports unused.

What part will need replacement first if a drive bay is swapped repeatedly?

The Mini SAS SFF-8087 cable end sees the most insertions, so its connector wears before the on-board M.2 edge or the SATA 3.0 ports.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.