Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Square 200mm transparent frame fan with red LED lighting and dual mounting hole patterns

SXDOOL

SXDOOL 200mm Case Fan Red LED 12V 700 RPM 19 dBA

SKU CH-G6HH-CWJCW

A 200 mm case fan with red LED lighting, 700 RPM speed, 19 dBA noise and 110 CFM airflow for high-volume cooling

  • TypeCase Fan
  • Fan Size200mm
  • RPM<1600 RPM
  • Air Flow>80 CFM
  • Noise Level15 - 20 dBA
  • Power Connector3 / 4 Pin
  • Moves more air with 110 CFM airflow rating
  • Runs quietly at 19 dBA noise level
  • Fits standard 200mm mounts with 154mm hole spacing
  • Red LED illumination toggleable via hardware switch
  • 12V 3/4-pin connector works with most motherboards

200 mm Red LED case fan

This 200 mm fan moves up to 110 CFM at 700 RPM while producing only 19 dBA. It runs on 12 V and draws 0.3 A, making it suited for builders who want high airflow with low noise in a large chassis. The red LED can be toggled on or off with a built-in key switch.

Dual mounting pattern and 3/4 pin connector

The frame measures 200 x 200 x 30 mm with a 18.7 cm blade diameter. Two hole patterns are provided: square holes on 154 mm centres and rectangular holes at 18 x 11 cm. The 3/4 pin power connector fits standard motherboard headers for PWM or voltage control. Transparent blades let the red light show clearly.

Replaces smaller or louder 200 mm fans

It upgrades older 200 mm units that spin faster or lack LED control. The jump is worth it when your case accepts the 154 mm or 18 x 11 cm spacing and you need more airflow at lower noise. It will not fit cases with proprietary hole layouts such as certain Phantom series models.

Priekšrocības

  • Moves more air with 110 CFM airflow rating
  • Runs quietly at 19 dBA noise level
  • Fits standard 200mm mounts with 154mm hole spacing
  • Red LED illumination toggleable via hardware switch
  • 12V 3/4-pin connector works with most motherboards

Specifikācijas

TypeCase Fan
Fan Size200mm
RPM<1600 RPM
Air Flow>80 CFM
Noise Level15 - 20 dBA
Power Connector3 / 4 Pin
ColorTransparent
LEDRed

Jautājumi par šo preci

Does the 3/4-pin connector limit the 700 RPM fan speed in practice?

The 3/4-pin connector supplies 12 V and supports PWM or voltage control, so the motherboard can run the fan at its rated 700 RPM or lower.

What are the exact mounting dimensions for the 200 mm frame?

The fan uses two patterns: four square holes on a 154 mm pitch and four rectangular holes spaced 18 mm by 11 mm.

How do you wire the red LED so it can be switched off independently?

A key switch on the fan housing controls the LED; the fan motor stays powered through the 3/4-pin connector while the light is toggled.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.