저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Square 200mm transparent frame fan with red LED lighting and dual mounting hole patterns

SXDOOL

SXDOOL 200mm Case Fan Red LED 12V 700 RPM 19 dBA

SKU CH-G6HH-CWJCW

A 200 mm case fan with red LED lighting, 700 RPM speed, 19 dBA noise and 110 CFM airflow for high-volume cooling

  • TypeCase Fan
  • Fan Size200mm
  • RPM<1600 RPM
  • Air Flow>80 CFM
  • Noise Level15 - 20 dBA
  • Power Connector3 / 4 Pin
  • Moves more air with 110 CFM airflow rating
  • Runs quietly at 19 dBA noise level
  • Fits standard 200mm mounts with 154mm hole spacing
  • Red LED illumination toggleable via hardware switch
  • 12V 3/4-pin connector works with most motherboards

200 mm Red LED case fan

This 200 mm fan moves up to 110 CFM at 700 RPM while producing only 19 dBA. It runs on 12 V and draws 0.3 A, making it suited for builders who want high airflow with low noise in a large chassis. The red LED can be toggled on or off with a built-in key switch.

Dual mounting pattern and 3/4 pin connector

The frame measures 200 x 200 x 30 mm with a 18.7 cm blade diameter. Two hole patterns are provided: square holes on 154 mm centres and rectangular holes at 18 x 11 cm. The 3/4 pin power connector fits standard motherboard headers for PWM or voltage control. Transparent blades let the red light show clearly.

Replaces smaller or louder 200 mm fans

It upgrades older 200 mm units that spin faster or lack LED control. The jump is worth it when your case accepts the 154 mm or 18 x 11 cm spacing and you need more airflow at lower noise. It will not fit cases with proprietary hole layouts such as certain Phantom series models.

주요 특징

  • Moves more air with 110 CFM airflow rating
  • Runs quietly at 19 dBA noise level
  • Fits standard 200mm mounts with 154mm hole spacing
  • Red LED illumination toggleable via hardware switch
  • 12V 3/4-pin connector works with most motherboards

사양

TypeCase Fan
Fan Size200mm
RPM<1600 RPM
Air Flow>80 CFM
Noise Level15 - 20 dBA
Power Connector3 / 4 Pin
ColorTransparent
LEDRed

이 상품에 대한 질문

Does the 3/4-pin connector limit the 700 RPM fan speed in practice?

The 3/4-pin connector supplies 12 V and supports PWM or voltage control, so the motherboard can run the fan at its rated 700 RPM or lower.

What are the exact mounting dimensions for the 200 mm frame?

The fan uses two patterns: four square holes on a 154 mm pitch and four rectangular holes spaced 18 mm by 11 mm.

How do you wire the red LED so it can be switched off independently?

A key switch on the fan housing controls the LED; the fan motor stays powered through the 3/4-pin connector while the light is toggled.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.