SXDOOL
SXDOOL 200mm Case Fan Red LED 12V 700 RPM 19 dBA
A 200 mm case fan with red LED lighting, 700 RPM speed, 19 dBA noise and 110 CFM airflow for high-volume cooling
- TypeCase Fan
- Fan Size200mm
- RPM<1600 RPM
- Air Flow>80 CFM
- Noise Level15 - 20 dBA
- Power Connector3 / 4 Pin
- Moves more air with 110 CFM airflow rating
- Runs quietly at 19 dBA noise level
- Fits standard 200mm mounts with 154mm hole spacing
- Red LED illumination toggleable via hardware switch
- 12V 3/4-pin connector works with most motherboards
200 mm Red LED case fan
This 200 mm fan moves up to 110 CFM at 700 RPM while producing only 19 dBA. It runs on 12 V and draws 0.3 A, making it suited for builders who want high airflow with low noise in a large chassis. The red LED can be toggled on or off with a built-in key switch.
Dual mounting pattern and 3/4 pin connector
The frame measures 200 x 200 x 30 mm with a 18.7 cm blade diameter. Two hole patterns are provided: square holes on 154 mm centres and rectangular holes at 18 x 11 cm. The 3/4 pin power connector fits standard motherboard headers for PWM or voltage control. Transparent blades let the red light show clearly.
Replaces smaller or louder 200 mm fans
It upgrades older 200 mm units that spin faster or lack LED control. The jump is worth it when your case accepts the 154 mm or 18 x 11 cm spacing and you need more airflow at lower noise. It will not fit cases with proprietary hole layouts such as certain Phantom series models.
Najważniejsze cechy
- Moves more air with 110 CFM airflow rating
- Runs quietly at 19 dBA noise level
- Fits standard 200mm mounts with 154mm hole spacing
- Red LED illumination toggleable via hardware switch
- 12V 3/4-pin connector works with most motherboards
Specyfikacja
| Type | Case Fan |
|---|---|
| Fan Size | 200mm |
| RPM | <1600 RPM |
| Air Flow | >80 CFM |
| Noise Level | 15 - 20 dBA |
| Power Connector | 3 / 4 Pin |
| Color | Transparent |
| LED | Red |
Pytania dotyczące tego produktu
Does the 3/4-pin connector limit the 700 RPM fan speed in practice?
The 3/4-pin connector supplies 12 V and supports PWM or voltage control, so the motherboard can run the fan at its rated 700 RPM or lower.
What are the exact mounting dimensions for the 200 mm frame?
The fan uses two patterns: four square holes on a 154 mm pitch and four rectangular holes spaced 18 mm by 11 mm.
How do you wire the red LED so it can be switched off independently?
A key switch on the fan housing controls the LED; the fan motor stays powered through the 3/4-pin connector while the light is toggled.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001049BTC
Dostępny