Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Square 200mm transparent frame fan with red LED lighting and dual mounting hole patterns

SXDOOL

SXDOOL 200mm Case Fan Red LED 12V 700 RPM 19 dBA

SKU CH-G6HH-CWJCW

A 200 mm case fan with red LED lighting, 700 RPM speed, 19 dBA noise and 110 CFM airflow for high-volume cooling

  • TypeCase Fan
  • Fan Size200mm
  • RPM<1600 RPM
  • Air Flow>80 CFM
  • Noise Level15 - 20 dBA
  • Power Connector3 / 4 Pin
  • Moves more air with 110 CFM airflow rating
  • Runs quietly at 19 dBA noise level
  • Fits standard 200mm mounts with 154mm hole spacing
  • Red LED illumination toggleable via hardware switch
  • 12V 3/4-pin connector works with most motherboards

200 mm Red LED case fan

This 200 mm fan moves up to 110 CFM at 700 RPM while producing only 19 dBA. It runs on 12 V and draws 0.3 A, making it suited for builders who want high airflow with low noise in a large chassis. The red LED can be toggled on or off with a built-in key switch.

Dual mounting pattern and 3/4 pin connector

The frame measures 200 x 200 x 30 mm with a 18.7 cm blade diameter. Two hole patterns are provided: square holes on 154 mm centres and rectangular holes at 18 x 11 cm. The 3/4 pin power connector fits standard motherboard headers for PWM or voltage control. Transparent blades let the red light show clearly.

Replaces smaller or louder 200 mm fans

It upgrades older 200 mm units that spin faster or lack LED control. The jump is worth it when your case accepts the 154 mm or 18 x 11 cm spacing and you need more airflow at lower noise. It will not fit cases with proprietary hole layouts such as certain Phantom series models.

Puntos fuertes

  • Moves more air with 110 CFM airflow rating
  • Runs quietly at 19 dBA noise level
  • Fits standard 200mm mounts with 154mm hole spacing
  • Red LED illumination toggleable via hardware switch
  • 12V 3/4-pin connector works with most motherboards

Especificaciones

TypeCase Fan
Fan Size200mm
RPM<1600 RPM
Air Flow>80 CFM
Noise Level15 - 20 dBA
Power Connector3 / 4 Pin
ColorTransparent
LEDRed

Preguntas sobre este artículo

Does the 3/4-pin connector limit the 700 RPM fan speed in practice?

The 3/4-pin connector supplies 12 V and supports PWM or voltage control, so the motherboard can run the fan at its rated 700 RPM or lower.

What are the exact mounting dimensions for the 200 mm frame?

The fan uses two patterns: four square holes on a 154 mm pitch and four rectangular holes spaced 18 mm by 11 mm.

How do you wire the red LED so it can be switched off independently?

A key switch on the fan housing controls the LED; the fan motor stays powered through the 3/4-pin connector while the light is toggled.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.