Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

SXDOOL

SXDOOL PLA03010S12M 30mm 12V 3-pin case fan

SKU CH-CRQ3-1HWXA MPN PLA03010S12M

A 30 mm 12 V ball-bearing case fan with 3-pin speed monitoring, running at 6000–6499 RPM for 3.5 CFM at 10–15 dBA

  • TypeCase Fan
  • Fan Size30mm
  • Bearing TypeBall
  • RPM6000-6499 RPM
  • Air Flow1-5 CFM
  • Noise Level10 - 15 dBA
  • Compact 30 mm frame fits tight Beiqiao heatsinks
  • Ball bearing rated for continuous 6300 RPM operation
  • Low 14 dBA noise keeps system acoustics quiet
  • 5 CFM airflow improves chipset cooling performance
  • 3-pin tachometer connector enables motherboard speed monitoring

Ultra-compact 30 mm case fan

The SXDOOL PLA03010S12M is a 30 mm square frame fan built for tight spaces such as chipset heatsinks, small-form-factor enclosures or industrial equipment. It runs on 12 V through a standard three-pin motherboard header and draws only 0.07 A, making it a low-power addition for targeted spot cooling.

Three-pin speed-sense limitation

The three-pin connector supplies power, ground and a tachometer signal but lacks PWM control, so the motherboard can monitor RPM but cannot dynamically adjust speed. Voltage-based regulation is possible if the header supports it, yet the fan will typically run at its fixed 6300 RPM ±5 % range unless the board reduces the supply voltage.

3.5 CFM airflow for chipset-scale loads

At 3.5 CFM and 14 dBA the fan moves enough air to lower temperatures on a northbridge, VRM heatsink or SSD controller, but it cannot serve as primary case ventilation or cool a CPU tower. The 6000–6499 RPM range provides measurable airflow in a 3010 form factor while keeping acoustic output below 15 dBA.

Priekšrocības

  • Compact 30 mm frame fits tight Beiqiao heatsinks
  • Ball bearing rated for continuous 6300 RPM operation
  • Low 14 dBA noise keeps system acoustics quiet
  • 5 CFM airflow improves chipset cooling performance
  • 3-pin tachometer connector enables motherboard speed monitoring

Specifikācijas

TypeCase Fan
Fan Size30mm
Bearing TypeBall
RPM6000-6499 RPM
Air Flow1-5 CFM
Noise Level10 - 15 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED

Jautājumi par šo preci

Should I choose the 6000-6499 RPM version or a lower-speed model?

This fan runs at 6300 RPM ±5% (6000-6499 RPM range) and moves 3.5 CFM; select it when a compact 30 mm frame must deliver maximum airflow for a chipset or small-form-factor heatsink.

What does the 14 dBA noise rating mean once the fan is installed?

At 14 dBA the fan is barely audible in a typical case; you will hear only a faint whisper even at full 6300 RPM speed.

How does the 3-pin connector limit speed control?

The 3-pin plug supplies 12 V, ground and a yellow tachometer wire; voltage regulation from the motherboard adjusts speed, but PWM control is not available.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.