SXDOOL
SXDOOL PLA03010S12M 30mm 12V 3-pin case fan
A 30 mm 12 V ball-bearing case fan with 3-pin speed monitoring, running at 6000–6499 RPM for 3.5 CFM at 10–15 dBA
- TypeCase Fan
- Fan Size30mm
- Bearing TypeBall
- RPM6000-6499 RPM
- Air Flow1-5 CFM
- Noise Level10 - 15 dBA
- Compact 30 mm frame fits tight Beiqiao heatsinks
- Ball bearing rated for continuous 6300 RPM operation
- Low 14 dBA noise keeps system acoustics quiet
- 5 CFM airflow improves chipset cooling performance
- 3-pin tachometer connector enables motherboard speed monitoring
Ultra-compact 30 mm case fan
The SXDOOL PLA03010S12M is a 30 mm square frame fan built for tight spaces such as chipset heatsinks, small-form-factor enclosures or industrial equipment. It runs on 12 V through a standard three-pin motherboard header and draws only 0.07 A, making it a low-power addition for targeted spot cooling.
Three-pin speed-sense limitation
The three-pin connector supplies power, ground and a tachometer signal but lacks PWM control, so the motherboard can monitor RPM but cannot dynamically adjust speed. Voltage-based regulation is possible if the header supports it, yet the fan will typically run at its fixed 6300 RPM ±5 % range unless the board reduces the supply voltage.
3.5 CFM airflow for chipset-scale loads
At 3.5 CFM and 14 dBA the fan moves enough air to lower temperatures on a northbridge, VRM heatsink or SSD controller, but it cannot serve as primary case ventilation or cool a CPU tower. The 6000–6499 RPM range provides measurable airflow in a 3010 form factor while keeping acoustic output below 15 dBA.
Najważniejsze cechy
- Compact 30 mm frame fits tight Beiqiao heatsinks
- Ball bearing rated for continuous 6300 RPM operation
- Low 14 dBA noise keeps system acoustics quiet
- 5 CFM airflow improves chipset cooling performance
- 3-pin tachometer connector enables motherboard speed monitoring
Specyfikacja
| Type | Case Fan |
|---|---|
| Fan Size | 30mm |
| Bearing Type | Ball |
| RPM | 6000-6499 RPM |
| Air Flow | 1-5 CFM |
| Noise Level | 10 - 15 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
Pytania dotyczące tego produktu
Should I choose the 6000-6499 RPM version or a lower-speed model?
This fan runs at 6300 RPM ±5% (6000-6499 RPM range) and moves 3.5 CFM; select it when a compact 30 mm frame must deliver maximum airflow for a chipset or small-form-factor heatsink.
What does the 14 dBA noise rating mean once the fan is installed?
At 14 dBA the fan is barely audible in a typical case; you will hear only a faint whisper even at full 6300 RPM speed.
How does the 3-pin connector limit speed control?
The 3-pin plug supplies 12 V, ground and a yellow tachometer wire; voltage regulation from the motherboard adjusts speed, but PWM control is not available.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001048BTC
Dostępny