Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

SXDOOL

SXDOOL PLA03010S12M 30mm 12V 3-pin case fan

SKU CH-CRQ3-1HWXA MPN PLA03010S12M

A 30 mm 12 V ball-bearing case fan with 3-pin speed monitoring, running at 6000–6499 RPM for 3.5 CFM at 10–15 dBA

  • TypeCase Fan
  • Fan Size30mm
  • Bearing TypeBall
  • RPM6000-6499 RPM
  • Air Flow1-5 CFM
  • Noise Level10 - 15 dBA
  • Compact 30 mm frame fits tight Beiqiao heatsinks
  • Ball bearing rated for continuous 6300 RPM operation
  • Low 14 dBA noise keeps system acoustics quiet
  • 5 CFM airflow improves chipset cooling performance
  • 3-pin tachometer connector enables motherboard speed monitoring

Ultra-compact 30 mm case fan

The SXDOOL PLA03010S12M is a 30 mm square frame fan built for tight spaces such as chipset heatsinks, small-form-factor enclosures or industrial equipment. It runs on 12 V through a standard three-pin motherboard header and draws only 0.07 A, making it a low-power addition for targeted spot cooling.

Three-pin speed-sense limitation

The three-pin connector supplies power, ground and a tachometer signal but lacks PWM control, so the motherboard can monitor RPM but cannot dynamically adjust speed. Voltage-based regulation is possible if the header supports it, yet the fan will typically run at its fixed 6300 RPM ±5 % range unless the board reduces the supply voltage.

3.5 CFM airflow for chipset-scale loads

At 3.5 CFM and 14 dBA the fan moves enough air to lower temperatures on a northbridge, VRM heatsink or SSD controller, but it cannot serve as primary case ventilation or cool a CPU tower. The 6000–6499 RPM range provides measurable airflow in a 3010 form factor while keeping acoustic output below 15 dBA.

Prednosti

  • Compact 30 mm frame fits tight Beiqiao heatsinks
  • Ball bearing rated for continuous 6300 RPM operation
  • Low 14 dBA noise keeps system acoustics quiet
  • 5 CFM airflow improves chipset cooling performance
  • 3-pin tachometer connector enables motherboard speed monitoring

Špecifikácie

TypeCase Fan
Fan Size30mm
Bearing TypeBall
RPM6000-6499 RPM
Air Flow1-5 CFM
Noise Level10 - 15 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED

Otázky k tomuto produktu

Should I choose the 6000-6499 RPM version or a lower-speed model?

This fan runs at 6300 RPM ±5% (6000-6499 RPM range) and moves 3.5 CFM; select it when a compact 30 mm frame must deliver maximum airflow for a chipset or small-form-factor heatsink.

What does the 14 dBA noise rating mean once the fan is installed?

At 14 dBA the fan is barely audible in a typical case; you will hear only a faint whisper even at full 6300 RPM speed.

How does the 3-pin connector limit speed control?

The 3-pin plug supplies 12 V, ground and a yellow tachometer wire; voltage regulation from the motherboard adjusts speed, but PWM control is not available.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.