Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular grey thermal pad 120 by 20 by 3.0 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Extreme 120x20x3.0mm thermal pad

SKU CH-2DPM-36AHN

Silicone thermal pad for voltage regulators and memory ICs, 120x20x3.0mm, electrically insulating to 8KV/mm, operating -100°C to +200°C

  • Long Term Operating Temperature-100 °C / +200 °C
  • FeaturesHardness Shore 00 - 65 Thickness 0,5–3,0 mm Typical thicknes

Option 120 x 20 x 3.0 mm

  • Maximum heat transfer with 260 % conductivity improvement
  • Fits complex surfaces perfectly thanks to clay-like consistency
  • Electrically safe at 8 KV/mm insulation rating
  • Stable performance from -100 °C to +200 °C
  • Clean operation with zero bleeding or pump-out

Thermal pad for VRM and memory cooling

This silicone-based pad measures 120 x 20 x 3.0 mm and is designed for voltage regulators and memory ICs requiring high compression. It offers most excellent thermal conductivity and long-term stability without bleeding. The material is electrically insulating at 8 KV/mm per ASTM D149.

Suits builders replacing gap-filling material

The clay-like consistency allows perfect surface shaping under pressure for a single installation. Buyers who need a reusable pad or a thinner profile for tight clearances should look elsewhere. The Shore 00 hardness of 65 and 3.38 g/cm³ density suit high-compression applications only.

3.0 mm thickness with 260 % conductivity gain over

This single specification determines whether the pad bridges your component-to-heatsink gap while delivering the thermal uplift needed for tough cooling operations. Operating range spans -100 °C to +200 °C with V-0 flammability rating.

Priekšrocības

  • Maximum heat transfer with 260 % conductivity improvement
  • Fits complex surfaces perfectly thanks to clay-like consistency
  • Electrically safe at 8 KV/mm insulation rating
  • Stable performance from -100 °C to +200 °C
  • Clean operation with zero bleeding or pump-out

Specifikācijas

BrandThermal Grizzly
SeriesMinus Pad Extreme
Long Term Operating Temperature-100 °C / +200 °C
FeaturesHardness Shore 00 - 65
Thickness 0,5–3,0 mm
Typical thickness tolerance ± 0,1 mm
Flammability V-0
Electically insulating Ja (8 KV/mm ASTM D149)
Density 3.38 g/cm³
Temperature Range -100 °C / +200 °C

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How does the 260 % conductivity improvement over the Minus Pad 8 affect real-world cooling?

The higher conductivity lets the pad move heat away from voltage regulators and memory ICs more efficiently, lowering their operating temperatures during heavy loads.

What does the 8 kV/mm dielectric strength mean for installation safety?

It confirms the pad is electrically insulating, so it can be placed directly on exposed circuitry without risk of short circuits.

Will the 120 x 20 x 3.0 mm sheet fit my GPU memory modules?

The pad measures 120 mm long, 20 mm wide and 3.0 mm thick; compare those dimensions to the gap and surface area of your specific modules before cutting.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.