Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Rectangular grey thermal pad 120 by 20 by 3.0 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Extreme 120x20x3.0mm thermal pad

SKU CH-2DPM-36AHN

Silicone thermal pad for voltage regulators and memory ICs, 120x20x3.0mm, electrically insulating to 8KV/mm, operating -100°C to +200°C

  • Long Term Operating Temperature-100 °C / +200 °C
  • FeaturesHardness Shore 00 - 65 Thickness 0,5–3,0 mm Typical thicknes

Option 120 x 20 x 3.0 mm

  • Maximum heat transfer with 260 % conductivity improvement
  • Fits complex surfaces perfectly thanks to clay-like consistency
  • Electrically safe at 8 KV/mm insulation rating
  • Stable performance from -100 °C to +200 °C
  • Clean operation with zero bleeding or pump-out

Thermal pad for VRM and memory cooling

This silicone-based pad measures 120 x 20 x 3.0 mm and is designed for voltage regulators and memory ICs requiring high compression. It offers most excellent thermal conductivity and long-term stability without bleeding. The material is electrically insulating at 8 KV/mm per ASTM D149.

Suits builders replacing gap-filling material

The clay-like consistency allows perfect surface shaping under pressure for a single installation. Buyers who need a reusable pad or a thinner profile for tight clearances should look elsewhere. The Shore 00 hardness of 65 and 3.38 g/cm³ density suit high-compression applications only.

3.0 mm thickness with 260 % conductivity gain over

This single specification determines whether the pad bridges your component-to-heatsink gap while delivering the thermal uplift needed for tough cooling operations. Operating range spans -100 °C to +200 °C with V-0 flammability rating.

Istaknuto

  • Maximum heat transfer with 260 % conductivity improvement
  • Fits complex surfaces perfectly thanks to clay-like consistency
  • Electrically safe at 8 KV/mm insulation rating
  • Stable performance from -100 °C to +200 °C
  • Clean operation with zero bleeding or pump-out

Specifikacije

BrandThermal Grizzly
SeriesMinus Pad Extreme
Long Term Operating Temperature-100 °C / +200 °C
FeaturesHardness Shore 00 - 65
Thickness 0,5–3,0 mm
Typical thickness tolerance ± 0,1 mm
Flammability V-0
Electically insulating Ja (8 KV/mm ASTM D149)
Density 3.38 g/cm³
Temperature Range -100 °C / +200 °C

Druge verzije ovog modela

još 1 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How does the 260 % conductivity improvement over the Minus Pad 8 affect real-world cooling?

The higher conductivity lets the pad move heat away from voltage regulators and memory ICs more efficiently, lowering their operating temperatures during heavy loads.

What does the 8 kV/mm dielectric strength mean for installation safety?

It confirms the pad is electrically insulating, so it can be placed directly on exposed circuitry without risk of short circuits.

Will the 120 x 20 x 3.0 mm sheet fit my GPU memory modules?

The pad measures 120 mm long, 20 mm wide and 3.0 mm thick; compare those dimensions to the gap and surface area of your specific modules before cutting.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.