Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Rectangular grey thermal pad 120 by 20 by 3.0 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Extreme 120x20x3.0mm thermal pad

SKU CH-2DPM-36AHN

Silicone thermal pad for voltage regulators and memory ICs, 120x20x3.0mm, electrically insulating to 8KV/mm, operating -100°C to +200°C

  • Long Term Operating Temperature-100 °C / +200 °C
  • FeaturesHardness Shore 00 - 65 Thickness 0,5–3,0 mm Typical thicknes

Option 120 x 20 x 3.0 mm

  • Maximum heat transfer with 260 % conductivity improvement
  • Fits complex surfaces perfectly thanks to clay-like consistency
  • Electrically safe at 8 KV/mm insulation rating
  • Stable performance from -100 °C to +200 °C
  • Clean operation with zero bleeding or pump-out

Thermal pad for VRM and memory cooling

This silicone-based pad measures 120 x 20 x 3.0 mm and is designed for voltage regulators and memory ICs requiring high compression. It offers most excellent thermal conductivity and long-term stability without bleeding. The material is electrically insulating at 8 KV/mm per ASTM D149.

Suits builders replacing gap-filling material

The clay-like consistency allows perfect surface shaping under pressure for a single installation. Buyers who need a reusable pad or a thinner profile for tight clearances should look elsewhere. The Shore 00 hardness of 65 and 3.38 g/cm³ density suit high-compression applications only.

3.0 mm thickness with 260 % conductivity gain over

This single specification determines whether the pad bridges your component-to-heatsink gap while delivering the thermal uplift needed for tough cooling operations. Operating range spans -100 °C to +200 °C with V-0 flammability rating.

Puntos fuertes

  • Maximum heat transfer with 260 % conductivity improvement
  • Fits complex surfaces perfectly thanks to clay-like consistency
  • Electrically safe at 8 KV/mm insulation rating
  • Stable performance from -100 °C to +200 °C
  • Clean operation with zero bleeding or pump-out

Especificaciones

BrandThermal Grizzly
SeriesMinus Pad Extreme
Long Term Operating Temperature-100 °C / +200 °C
FeaturesHardness Shore 00 - 65
Thickness 0,5–3,0 mm
Typical thickness tolerance ± 0,1 mm
Flammability V-0
Electically insulating Ja (8 KV/mm ASTM D149)
Density 3.38 g/cm³
Temperature Range -100 °C / +200 °C

Otras versiones de este modelo

1 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

How does the 260 % conductivity improvement over the Minus Pad 8 affect real-world cooling?

The higher conductivity lets the pad move heat away from voltage regulators and memory ICs more efficiently, lowering their operating temperatures during heavy loads.

What does the 8 kV/mm dielectric strength mean for installation safety?

It confirms the pad is electrically insulating, so it can be placed directly on exposed circuitry without risk of short circuits.

Will the 120 x 20 x 3.0 mm sheet fit my GPU memory modules?

The pad measures 120 mm long, 20 mm wide and 3.0 mm thick; compare those dimensions to the gap and surface area of your specific modules before cutting.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.