Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular grey thermal pad 120 by 20 by 3.0 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Extreme 120x20x3.0mm thermal pad

SKU CH-2DPM-36AHN

Silicone thermal pad for voltage regulators and memory ICs, 120x20x3.0mm, electrically insulating to 8KV/mm, operating -100°C to +200°C

  • Long Term Operating Temperature-100 °C / +200 °C
  • FeaturesHardness Shore 00 - 65 Thickness 0,5–3,0 mm Typical thicknes

Option 120 x 20 x 3.0 mm

  • Maximum heat transfer with 260 % conductivity improvement
  • Fits complex surfaces perfectly thanks to clay-like consistency
  • Electrically safe at 8 KV/mm insulation rating
  • Stable performance from -100 °C to +200 °C
  • Clean operation with zero bleeding or pump-out

Thermal pad for VRM and memory cooling

This silicone-based pad measures 120 x 20 x 3.0 mm and is designed for voltage regulators and memory ICs requiring high compression. It offers most excellent thermal conductivity and long-term stability without bleeding. The material is electrically insulating at 8 KV/mm per ASTM D149.

Suits builders replacing gap-filling material

The clay-like consistency allows perfect surface shaping under pressure for a single installation. Buyers who need a reusable pad or a thinner profile for tight clearances should look elsewhere. The Shore 00 hardness of 65 and 3.38 g/cm³ density suit high-compression applications only.

3.0 mm thickness with 260 % conductivity gain over

This single specification determines whether the pad bridges your component-to-heatsink gap while delivering the thermal uplift needed for tough cooling operations. Operating range spans -100 °C to +200 °C with V-0 flammability rating.

Přednosti

  • Maximum heat transfer with 260 % conductivity improvement
  • Fits complex surfaces perfectly thanks to clay-like consistency
  • Electrically safe at 8 KV/mm insulation rating
  • Stable performance from -100 °C to +200 °C
  • Clean operation with zero bleeding or pump-out

Specifikace

BrandThermal Grizzly
SeriesMinus Pad Extreme
Long Term Operating Temperature-100 °C / +200 °C
FeaturesHardness Shore 00 - 65
Thickness 0,5–3,0 mm
Typical thickness tolerance ± 0,1 mm
Flammability V-0
Electically insulating Ja (8 KV/mm ASTM D149)
Density 3.38 g/cm³
Temperature Range -100 °C / +200 °C

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How does the 260 % conductivity improvement over the Minus Pad 8 affect real-world cooling?

The higher conductivity lets the pad move heat away from voltage regulators and memory ICs more efficiently, lowering their operating temperatures during heavy loads.

What does the 8 kV/mm dielectric strength mean for installation safety?

It confirms the pad is electrically insulating, so it can be placed directly on exposed circuitry without risk of short circuits.

Will the 120 x 20 x 3.0 mm sheet fit my GPU memory modules?

The pad measures 120 mm long, 20 mm wide and 3.0 mm thick; compare those dimensions to the gap and surface area of your specific modules before cutting.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.