XPG GAMMIX S11 Pro 1TB internal SSD with heatsink
- Internal Solid Stat…
- Consumer
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
XPG
2 TB PCIe 3.0 x4 NVMe 1.3 SSD with heatsink reaching 3500 MB/s read and 3000 MB/s write
Options 2TB S11 Pro
This internal SSD uses the M.2 2280 form factor and a PCIe 3.0 x4 interface with NVMe 1.3 support. It targets gamers, PC enthusiasts, overclockers and video rendering professionals who need high sequential throughput. The integrated heatsink lowers drive temperature by up to 10°C compared to models without one, aiding stability under sustained load.
The drive fits standard M.2 slots on current Intel and AMD desktop platforms. Ensure the motherboard BIOS is up to date so the NVMe device is detected at boot. A frequent problem is thermal throttling if the heatsink contacts a motherboard shield or backplate without a gap; leave a small clearance for airflow.
With 2TB of 3D NAND storage and a 1280 TBW endurance rating, the drive handles large game libraries, project files and heavy write workloads comfortably. Sequential speeds reach 3500 MB/s read and 3000 MB/s write, while random performance hits 360000 IOPS. Under extreme, sustained write scenarios the SLC cache can saturate, causing speeds to drop toward native NAND levels.
| Brand | XPG |
|---|---|
| Series | GAMMIX S11 Pro |
| Model | AGAMMIXS11P-2TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Controller | SMI SM2262EN |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| 4KB Random Read | Up to 360,000 IOPS |
| 4KB Random Write | Up to 360,000 IOPS |
| Terabytes Written (TBW) | 1280TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 6.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 11.00g |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Check that the drive is detected at PCIe 3.0 x4 speed in BIOS or Device Manager, then run a benchmark to confirm sequential reads near 3500 MB/s and writes near 3000 MB/s with random IOPS around 360000.
The box contains the M.2 2280 SSD with its integrated heatsink already attached; you must provide a compatible M.2 slot and, if your motherboard lacks a mounting standoff, the correct screw.
The 2TB model offers 1280 TBW endurance and up to 3500/3000 MB/s speeds, making it the largest capacity in the S11 Pro line for sustained high-demand workloads.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?