XPG GAMMIX S11 Pro 1TB internal SSD with heatsink
- Internal Solid Stat…
- Consumer
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
XPG
2 TB PCIe 3.0 x4 NVMe 1.3 SSD with heatsink reaching 3500 MB/s read and 3000 MB/s write
Options 2TB S11 Pro
This internal SSD uses the M.2 2280 form factor and a PCIe 3.0 x4 interface with NVMe 1.3 support. It targets gamers, PC enthusiasts, overclockers and video rendering professionals who need high sequential throughput. The integrated heatsink lowers drive temperature by up to 10°C compared to models without one, aiding stability under sustained load.
The drive fits standard M.2 slots on current Intel and AMD desktop platforms. Ensure the motherboard BIOS is up to date so the NVMe device is detected at boot. A frequent problem is thermal throttling if the heatsink contacts a motherboard shield or backplate without a gap; leave a small clearance for airflow.
With 2TB of 3D NAND storage and a 1280 TBW endurance rating, the drive handles large game libraries, project files and heavy write workloads comfortably. Sequential speeds reach 3500 MB/s read and 3000 MB/s write, while random performance hits 360000 IOPS. Under extreme, sustained write scenarios the SLC cache can saturate, causing speeds to drop toward native NAND levels.
| Brand | XPG |
|---|---|
| Series | GAMMIX S11 Pro |
| Model | AGAMMIXS11P-2TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Controller | SMI SM2262EN |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| 4KB Random Read | Up to 360,000 IOPS |
| 4KB Random Write | Up to 360,000 IOPS |
| Terabytes Written (TBW) | 1280TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 6.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 11.00g |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
Check that the drive is detected at PCIe 3.0 x4 speed in BIOS or Device Manager, then run a benchmark to confirm sequential reads near 3500 MB/s and writes near 3000 MB/s with random IOPS around 360000.
The box contains the M.2 2280 SSD with its integrated heatsink already attached; you must provide a compatible M.2 slot and, if your motherboard lacks a mounting standoff, the correct screw.
The 2TB model offers 1280 TBW endurance and up to 3500/3000 MB/s speeds, making it the largest capacity in the S11 Pro line for sustained high-demand workloads.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?