BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
YINGHUA
Dual-socket X99 server board with two E5-2609 V3 CPUs, eight DDR4 ECC slots up to 32 GB each, six SATA 3.0 ports and dual PCIe x16 slots
This motherboard pairs an Intel X99 chipset with two LGA2011 sockets and ships with a matched pair of E5-2609 V3 processors. It targets builders who need a ready-to-run dual-CPU platform for multi-threaded server workloads without sourcing CPUs separately. Eight DDR4 slots accept ordinary or ECC modules up to 32 GB each at 2133, 2400 or 2800 MT/s.
Moving from a single-socket X99 board doubles the physical CPU count and the available memory channels, which benefits virtualization hosts and render farms that scale across cores. The jump is worth it when the workload can use the extra threads and the memory capacity of sixteen DIMM slots across two boards is not required. Six SATA 3.0 ports and two PCIe x16 slots carry over existing storage and add-in cards.
The single M.2 slot labelled M.2 supports PCIe signalling only, so SATA-based M.2 drives will not function in that slot. A second M.1 slot accepts both PCIe and SATA M.2 devices, giving one flexible option for solid-state storage. Network connectivity is provided by a Realtek 8106E or 8111H controller capped at 100 Mbit/s, which restricts throughput for modern network-attached storage or backup tasks.
| CPU Type | Intel Atom |
|---|
The board measures 290 x 280 mm, which matches the common E-ATX footprint used in many 2U and 4U server cases. Verify your chassis specifications for exact mounting-hole alignment before purchase.
Install each E5-2609 V3 processor into its socket, apply a thin layer of the supplied thermal grease on the heat-spreader, then attach the heatsinks. The step often missed is tightening the heatsink screws in a diagonal pattern to ensure even pressure.
DDR4 ECC modules do not have a scheduled replacement interval. Reseat them only if the system reports correctable memory errors or fails to POST after a hardware change; otherwise they run for the life of the motherboard.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?