BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
YINGHUA
Dual-socket X99 server board with two E5-2609 V3 CPUs, eight DDR4 ECC slots up to 32 GB each, six SATA 3.0 ports and dual PCIe x16 slots
This motherboard pairs an Intel X99 chipset with two LGA2011 sockets and ships with a matched pair of E5-2609 V3 processors. It targets builders who need a ready-to-run dual-CPU platform for multi-threaded server workloads without sourcing CPUs separately. Eight DDR4 slots accept ordinary or ECC modules up to 32 GB each at 2133, 2400 or 2800 MT/s.
Moving from a single-socket X99 board doubles the physical CPU count and the available memory channels, which benefits virtualization hosts and render farms that scale across cores. The jump is worth it when the workload can use the extra threads and the memory capacity of sixteen DIMM slots across two boards is not required. Six SATA 3.0 ports and two PCIe x16 slots carry over existing storage and add-in cards.
The single M.2 slot labelled M.2 supports PCIe signalling only, so SATA-based M.2 drives will not function in that slot. A second M.1 slot accepts both PCIe and SATA M.2 devices, giving one flexible option for solid-state storage. Network connectivity is provided by a Realtek 8106E or 8111H controller capped at 100 Mbit/s, which restricts throughput for modern network-attached storage or backup tasks.
| CPU Type | Intel Atom |
|---|
The board measures 290 x 280 mm, which matches the common E-ATX footprint used in many 2U and 4U server cases. Verify your chassis specifications for exact mounting-hole alignment before purchase.
Install each E5-2609 V3 processor into its socket, apply a thin layer of the supplied thermal grease on the heat-spreader, then attach the heatsinks. The step often missed is tightening the heatsink screws in a diagonal pattern to ensure even pressure.
DDR4 ECC modules do not have a scheduled replacement interval. Reseat them only if the system reports correctable memory errors or fails to POST after a hardware change; otherwise they run for the life of the motherboard.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?