Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black square 50 by 15 mm maglev fan three wire connector

Zyvpee

Zyvpee KDE1205PHV1 5015 12V 1.3W 3 Pin maglev case fan

SKU CH-X6NG-D85TB

Compact 50 × 15 mm maglev CPU cooler fan runs below 1600 RPM at 12 V and 1.3 W with a three-pin connector

  • TypeCPU Cooler Fan
  • Bearing Typemaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.3 W draw keeps power use low
  • 50 × 15 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables direct motherboard speed control
  • Sub-1600 RPM limit balances airflow and noise

Compact 50 mm maglev fan

The Zyvpee KDE1205PHV1 is a 50 mm square frame cooler designed for tight CPU heatsinks or small-form-factor cases. It suits builders who need a low-profile airflow solution without LED lighting.

Maglev bearing eases mounting

The magnetic levitation bearing reduces friction and allows the fan to sit in any orientation without noise penalty. The three-pin connector plugs directly into standard motherboard headers for simple voltage control.

12 V 1.3 W power draw decides fit

At 1.3 watts the fan draws minimal current from a 12 volt header, making it compatible with most low-power fan circuits. Buyers who need higher static pressure or PWM speed control should look elsewhere.

Priekšrocības

  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.3 W draw keeps power use low
  • 50 × 15 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables direct motherboard speed control
  • Sub-1600 RPM limit balances airflow and noise

Specifikācijas

Brandzyvpee
SeriesKDE1205PHV1
ModelKDE1205PHV1
TypeCPU Cooler Fan
Bearing Typemaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions50*15mm

Jautājumi par šo preci

How can I confirm the maglev fan is spinning correctly after installation?

Check that the RPM stays below 1600 RPM in your BIOS or monitoring software and listen for the quiet maglev operation at 12 V.

What comes with the KDE1205PHV1 and what must I source separately?

The box contains the 50×15 mm 3-pin maglev fan only; mounting screws and any fan-controller or adapter cables are not included.

Which version of the 5015 maglev fan should I choose for a 12 V header?

The KDE1205PHV1 is the 12 V 1.3 W model, so select this version when your motherboard or controller provides a 12 V 3-pin header.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.