Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small black square 50 by 15 mm maglev fan three wire connector

Zyvpee

Zyvpee KDE1205PHV1 5015 12V 1.3W 3 Pin maglev case fan

SKU CH-X6NG-D85TB

Compact 50 × 15 mm maglev CPU cooler fan runs below 1600 RPM at 12 V and 1.3 W with a three-pin connector

  • TypeCPU Cooler Fan
  • Bearing Typemaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.3 W draw keeps power use low
  • 50 × 15 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables direct motherboard speed control
  • Sub-1600 RPM limit balances airflow and noise

Compact 50 mm maglev fan

The Zyvpee KDE1205PHV1 is a 50 mm square frame cooler designed for tight CPU heatsinks or small-form-factor cases. It suits builders who need a low-profile airflow solution without LED lighting.

Maglev bearing eases mounting

The magnetic levitation bearing reduces friction and allows the fan to sit in any orientation without noise penalty. The three-pin connector plugs directly into standard motherboard headers for simple voltage control.

12 V 1.3 W power draw decides fit

At 1.3 watts the fan draws minimal current from a 12 volt header, making it compatible with most low-power fan circuits. Buyers who need higher static pressure or PWM speed control should look elsewhere.

Punti di forza

  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.3 W draw keeps power use low
  • 50 × 15 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables direct motherboard speed control
  • Sub-1600 RPM limit balances airflow and noise

Caratteristiche tecniche

Brandzyvpee
SeriesKDE1205PHV1
ModelKDE1205PHV1
TypeCPU Cooler Fan
Bearing Typemaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions50*15mm

Domande su questo articolo

How can I confirm the maglev fan is spinning correctly after installation?

Check that the RPM stays below 1600 RPM in your BIOS or monitoring software and listen for the quiet maglev operation at 12 V.

What comes with the KDE1205PHV1 and what must I source separately?

The box contains the 50×15 mm 3-pin maglev fan only; mounting screws and any fan-controller or adapter cables are not included.

Which version of the 5015 maglev fan should I choose for a 12 V header?

The KDE1205PHV1 is the 12 V 1.3 W model, so select this version when your motherboard or controller provides a 12 V 3-pin header.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.