Zyvpee
Zyvpee KDE1205PHV1 5015 12V 1.3W 3 Pin maglev case fan
Compact 50 × 15 mm maglev CPU cooler fan runs below 1600 RPM at 12 V and 1.3 W with a three-pin connector
- TypeCPU Cooler Fan
- Bearing Typemaglev
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Maglev bearing reduces friction for quieter operation
- 12 V 1.3 W draw keeps power use low
- 50 × 15 mm frame fits tight CPU cooler mounts
- Three-pin connector enables direct motherboard speed control
- Sub-1600 RPM limit balances airflow and noise
Compact 50 mm maglev fan
The Zyvpee KDE1205PHV1 is a 50 mm square frame cooler designed for tight CPU heatsinks or small-form-factor cases. It suits builders who need a low-profile airflow solution without LED lighting.
Maglev bearing eases mounting
The magnetic levitation bearing reduces friction and allows the fan to sit in any orientation without noise penalty. The three-pin connector plugs directly into standard motherboard headers for simple voltage control.
12 V 1.3 W power draw decides fit
At 1.3 watts the fan draws minimal current from a 12 volt header, making it compatible with most low-power fan circuits. Buyers who need higher static pressure or PWM speed control should look elsewhere.
Акценти
- Maglev bearing reduces friction for quieter operation
- 12 V 1.3 W draw keeps power use low
- 50 × 15 mm frame fits tight CPU cooler mounts
- Three-pin connector enables direct motherboard speed control
- Sub-1600 RPM limit balances airflow and noise
Спецификации
| Brand | zyvpee |
|---|---|
| Series | KDE1205PHV1 |
| Model | KDE1205PHV1 |
| Type | CPU Cooler Fan |
| Bearing Type | maglev |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 50*15mm |
Въпроси за този артикул
How can I confirm the maglev fan is spinning correctly after installation?
Check that the RPM stays below 1600 RPM in your BIOS or monitoring software and listen for the quiet maglev operation at 12 V.
What comes with the KDE1205PHV1 and what must I source separately?
The box contains the 50×15 mm 3-pin maglev fan only; mounting screws and any fan-controller or adapter cables are not included.
Which version of the 5015 maglev fan should I choose for a 12 V header?
The KDE1205PHV1 is the 12 V 1.3 W model, so select this version when your motherboard or controller provides a 12 V 3-pin header.
Още от този рафт
Често сравнявани заедно
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 щ.д.
0.00001041BTC
В наличност