暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black square 50 by 15 mm maglev fan three wire connector

Zyvpee

Zyvpee KDE1205PHV1 5015 12V 1.3W 3 Pin maglev case fan

SKU CH-X6NG-D85TB

Compact 50 × 15 mm maglev CPU cooler fan runs below 1600 RPM at 12 V and 1.3 W with a three-pin connector

  • TypeCPU Cooler Fan
  • Bearing Typemaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.3 W draw keeps power use low
  • 50 × 15 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables direct motherboard speed control
  • Sub-1600 RPM limit balances airflow and noise

Compact 50 mm maglev fan

The Zyvpee KDE1205PHV1 is a 50 mm square frame cooler designed for tight CPU heatsinks or small-form-factor cases. It suits builders who need a low-profile airflow solution without LED lighting.

Maglev bearing eases mounting

The magnetic levitation bearing reduces friction and allows the fan to sit in any orientation without noise penalty. The three-pin connector plugs directly into standard motherboard headers for simple voltage control.

12 V 1.3 W power draw decides fit

At 1.3 watts the fan draws minimal current from a 12 volt header, making it compatible with most low-power fan circuits. Buyers who need higher static pressure or PWM speed control should look elsewhere.

特長

  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.3 W draw keeps power use low
  • 50 × 15 mm frame fits tight CPU cooler mounts
  • Three-pin connector enables direct motherboard speed control
  • Sub-1600 RPM limit balances airflow and noise

仕様

Brandzyvpee
SeriesKDE1205PHV1
ModelKDE1205PHV1
TypeCPU Cooler Fan
Bearing Typemaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions50*15mm

この商品に関する質問

How can I confirm the maglev fan is spinning correctly after installation?

Check that the RPM stays below 1600 RPM in your BIOS or monitoring software and listen for the quiet maglev operation at 12 V.

What comes with the KDE1205PHV1 and what must I source separately?

The box contains the 50×15 mm 3-pin maglev fan only; mounting screws and any fan-controller or adapter cables are not included.

Which version of the 5015 maglev fan should I choose for a 12 V header?

The KDE1205PHV1 is the 12 V 1.3 W model, so select this version when your motherboard or controller provides a 12 V 3-pin header.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。