Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Compact high-voltage power supply module, circuit board with components, green finish

Analog Technologies

Analog Technologies High Voltage Power Supply 0-5kV 2mA 24V Input AHV24V5KV2MAW

SKU CH-NR99-X8TTQ

Converts 24 V DC to an adjustable 0–5 kV output at up to 2 mA with electronic shutdown control for precision high-voltage applications

  • TypeHigh Voltage Power Supply

Options AHV24V5KV2MAW

  • 0 to 5 kV output driven by a 0 to 5 V control signal
  • 24 V DC input draws only 130 to 590 mA
  • 5 V ± 0.05 V reference enables precise voltage setting
  • Electronic shutdown control protects connected equipment
  • Compact DC-DC module suits X-ray, spectrometry and coating systems

Compact High-Voltage DC-DC Module

This Analog Technologies module converts a 24 V DC input into a regulated 0–5 kV output with up to 2 mA of current. It targets engineers and integrators building X-ray sources, spectrometry front-ends, electrospinning rigs or thin-film deposition systems that require a programmable high-voltage rail.

Straightforward Wiring With Control Pin

The unit accepts 24 V ± 1 V and draws between 130 mA and 590 mA depending on load. Output voltage follows a 0–5 V control signal, while a 5 V ± 0.05 V reference and an electronic shutdown pin simplify integration. No high-voltage cabling is included, so insulation rating and creepage distances must be provided by the installer.

Verify Your 24 V Rail And Safety Clearance

Confirm that your 24 V supply can deliver at least 590 mA continuously and that its regulation stays within the ± 1 V window. Ensure the enclosure provides adequate creepage and clearance for 5 kV operation and that your control electronics can source a clean 0–5 V analogue signal for voltage programming.

Ciri-ciri utama

  • 0 to 5 kV output driven by a 0 to 5 V control signal
  • 24 V DC input draws only 130 to 590 mA
  • 5 V ± 0.05 V reference enables precise voltage setting
  • Electronic shutdown control protects connected equipment
  • Compact DC-DC module suits X-ray, spectrometry and coating systems

Spesifikasi

TypeHigh Voltage Power Supply

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How do I verify the 0-5kV output is tracking the 0-5V control input correctly?

Measure the 5V reference pin — it should read 5V ± .05V. Then apply a known control voltage between 0 and 5V and confirm the high-voltage output scales proportionally up to 5kV.

What comes in the box and what must I source separately?

The module itself is supplied. You must provide a 24V DC source capable of 130-590mA, a 0-5V control signal, wiring for the high-voltage output, and any safety interlocks or enclosures your application requires.

The unit is listed as a single 5kV 2mA model — how do I know it fits my voltage and current needs?

This module delivers 0-5kV at up to 2mA from a 24V input. If your load stays within that voltage and current envelope and you can supply 130-590mA at 24V, this version matches the requirement.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.