Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Six matte black brass G1/4 fittings for 14mm rigid tubing

Bitspower

Bitspower BP-MBEML14-6P G1/4" Multi-Link Fitting 14mm OD 6-pack

SKU CH-P5EN-HKCD7 MPN BP-MBEML14-6P

Six-pack of matte-black G1/4″ multi-link fittings for 14 mm OD rigid tubing

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures lasting durability
  • Matt black nickel finish resists corrosion and wear
  • G1/4 inch thread with 5 mm length fits standard blocks
  • Six-piece pack simplifies multi-link rigid tube runs

Multi-Link Extension Fitting

These G1/4" fittings extend rigid-tube runs in custom liquid-cooling loops. The six-piece pack suits builders who need extra length between components without adding angled adapters. They are not for soft-tube systems or loops that require quick-disconnect couplings.

14mm OD Compatibility

Each fitting accepts 14mm outer-diameter rigid tubing and includes a spare O-ring for slightly undersized tube such as cut brass. The G1/4" thread with 5mm engagement depth is the single dimension that decides fitment with blocks, radiators and reservoirs.

Installation Notes

Hand-tighten the knurled collar until the O-ring seats, then give a light quarter-turn with a soft-jaw wrench. Over-tightening can score the matt black nickel finish. Run a 24-hour leak test with only the pump powered before adding coolant to the full system.

Ciri-ciri utama

  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures lasting durability
  • Matt black nickel finish resists corrosion and wear
  • G1/4 inch thread with 5 mm length fits standard blocks
  • Six-piece pack simplifies multi-link rigid tube runs

Spesifikasi

TypeFittings

Soalan tentang produk ini

How does the 14 mm outer-diameter spec translate when the fitting is installed in a loop?

The fitting is engineered for 14 mm OD rigid tubing, so the tube seats directly into the Hi-Flow bore without adapters, maintaining full internal diameter for unrestricted coolant flow.

What does the G1/4" thread with a 5 mm length mean for component compatibility?

The standard G1/4" thread mates with any G1/4" port on blocks, radiators or reservoirs, while the 5 mm thread depth ensures a secure seal without bottoming out in shallow ports.

What clearance or spacing is needed to mount these multi-link fittings in a build?

Each fitting adds a straight 14 mm OD extension; allow enough room for the tube to enter squarely and for the hex body to be tightened without fouling adjacent components.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.