Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Six matte black brass G1/4 fittings for 14mm rigid tubing

Bitspower

Bitspower BP-MBEML14-6P G1/4" Multi-Link Fitting 14mm OD 6-pack

SKU CH-P5EN-HKCD7 MPN BP-MBEML14-6P

Six-pack of matte-black G1/4″ multi-link fittings for 14 mm OD rigid tubing

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures lasting durability
  • Matt black nickel finish resists corrosion and wear
  • G1/4 inch thread with 5 mm length fits standard blocks
  • Six-piece pack simplifies multi-link rigid tube runs

Multi-Link Extension Fitting

These G1/4" fittings extend rigid-tube runs in custom liquid-cooling loops. The six-piece pack suits builders who need extra length between components without adding angled adapters. They are not for soft-tube systems or loops that require quick-disconnect couplings.

14mm OD Compatibility

Each fitting accepts 14mm outer-diameter rigid tubing and includes a spare O-ring for slightly undersized tube such as cut brass. The G1/4" thread with 5mm engagement depth is the single dimension that decides fitment with blocks, radiators and reservoirs.

Installation Notes

Hand-tighten the knurled collar until the O-ring seats, then give a light quarter-turn with a soft-jaw wrench. Over-tightening can score the matt black nickel finish. Run a 24-hour leak test with only the pump powered before adding coolant to the full system.

Přednosti

  • True Hi-Flow design maximises coolant throughput
  • High-quality brass construction ensures lasting durability
  • Matt black nickel finish resists corrosion and wear
  • G1/4 inch thread with 5 mm length fits standard blocks
  • Six-piece pack simplifies multi-link rigid tube runs

Specifikace

TypeFittings

Otázky k tomuto produktu

How does the 14 mm outer-diameter spec translate when the fitting is installed in a loop?

The fitting is engineered for 14 mm OD rigid tubing, so the tube seats directly into the Hi-Flow bore without adapters, maintaining full internal diameter for unrestricted coolant flow.

What does the G1/4" thread with a 5 mm length mean for component compatibility?

The standard G1/4" thread mates with any G1/4" port on blocks, radiators or reservoirs, while the 5 mm thread depth ensures a secure seal without bottoming out in shallow ports.

What clearance or spacing is needed to mount these multi-link fittings in a build?

Each fitting adds a straight 14 mm OD extension; allow enough room for the tube to enter squarely and for the hex body to be tightened without fouling adjacent components.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.